ABB i-bus KNX Product Manual page 24

Designation
Comfort extension via
presence button in night
mode
cycl. sending of the current
operating mode
3.4.8 I nputs E1, E2, E3
3 4 B
Designation
Reaction to the contact
closing
Reaction to the contact
opening
send cyclically
Values
none
30 min.
1 hour
1.5 hours
2 hours
2.5 hours
3 hours
3.5 hours
not cyclical, only with a
change
every 2 mins., every 3
mins.
every 5 mins., every 10
mins.
every 15 mins., every 20
mins.
every 30 mins., every 45
mins.
every 60 mins.
Values
Function of E1, E2 or E3: Switch
Off
On
Circ
none
Off
On
Circ
none
not cyclical, only with a
change
every 2 mins., every 3
mins.
... every 45 mins., every 60
mins.
Meaning
-
Party button:
this means that the RTF/A
1.1 can change back to
comfort mode for a limited
time from night/frost mode
via the presence object.
If the device was
previously in standby, the
time limit does not apply.
The comfort mode is then
not cancelled until the next
manual or bus-controlled
operating mode change.
how often is the current
operating mode to be sent?
Meaning
Send switch-off command
Send switch-on command
Reverse last switch
command
Do not send
See above
At what interval is the
status of the switch object
to be sent?
24