ABB i-bus KNX Product Manual page 25

Function of E1
Function of E2
Function of E1, E2, E3: One-panel blind operation
Function of E1
(or E2, E3)
Designation
Function of E1
Function of E2
Function of E1 (+ E2): Blind up (down)
Blind up
Blind down
One-panel blind operation
Values
Function of E1 (+ E2): Brighter/darker dimming
Brighter dimming
Dimming darker
Briefly press the button:
Step/stop or slat turn (obj.
9)
Long button press:
Up telegram (obj.12)
Briefly press the button:
Step/stop or slat turn (obj.
9)
Long button press:
Down telegram (obj.12)
Briefly press the button:
Step/stop or slat turn.
The sent value is set
against the telegram of the
last movement command
Long button press:
Up / down
The direction of movement
is reversed each time the
button is pressed. Down is
always started first after a
bus failure or reset.
Meaning
Briefly press the button:
On / off (obj. 9)
Long button press:
Brighter dimming (obj.12)
Briefly press the button:
On / off (obj. 9)
Long button press:
Darker dimming (obj.12)
25