Fleetsync: Alphanumeric 2-Way Paging Function; Selcall (Selective Calling) - Kenwood NX-200 Instruction Manual

FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION

FleetSync is an Alphanumeric 2-way Paging Function, and is a
protocol owned by JVC KENWOOD Corporation.
Note:
◆ This function is available only in analog operation.
◆ Ask your dealer for further information regarding the
NX-200S/ NX-300S.

SELCALL (SELECTIVE CALLING)

A Selcall is a voice call to a station or group of stations.
■ Transmitting (NX-200/ NX-300/ NX-200G/ NX-300G Only)
1 Select your desired zone and channel.
2 Press the key programmed as Selcall or Selcall +
Status to enter Selcall mode.
3 Press
• On keypad models, if Manual Dialing is enabled, you can
directly enter the station ID.
4 Press the PTT switch and begin your conversation.
■ Receiving
An alert tone will sound and the transceiver will enter
Selcall mode. The calling station's ID will appear when a
Selcall is received (NX-200/ NX-300/ NX-200G/ NX-300G
Only). You can respond to the call by pressing the PTT
switch and speaking into the microphone.
■ Identifi cation Codes
An ID code is a combination of a 3-digit Fleet number and a
4-digit ID number. Each transceiver has its own ID.
• Enter a Fleet number (100 ~ 349) to make a group call.
• Enter an ID number (1000 ~ 4999) to make an individual call in your fl eet.
Enter a Fleet number to make a call to all units in the selected
•
fl eet (Fleet call).
• Enter an ID number to make a call to the selected ID in all
fl eets (Supervisor call).
20
/ to select the station you want to call.