Battery Saver; Key Lock; Low Battery Warning (Nx-200S/ Nx-300S); Low Battery Warning - Kenwood NX-200 Instruction Manual

BATTERY SAVER

The Battery Saver can be activated only on Conventional channels.
This function decreases the amount of power used when a signal is
not being received and no operations are being performed.

KEY LOCK

Press the key programmed as Key Lock to lock and unlock the
transceiver keys.
• The following keys still function when Key Lock is activated:
Emergency, Backlight, Monitor, Monitor Momentary, Squelch Off,
Squelch Off Momentary, Function, Key Lock, PTT

LOW BATTERY WARNING

Press the key programmed as Battery Indicator. The LED
lights for 2 seconds, displaying the battery power remaining, as
described in the table below. When the battery power is very
low, recharge or replace the battery pack.
Lights Green
High
LOW BATTERY WARNING
Your dealer can set an alert tone to sound and the LED
indicator to blink red when the battery power is low. The
battery power icon displays the battery power remaining, as
described in the table below. When the battery power is very
low, recharge or replace the battery pack.
High

SIGNAL STRENGTH INDICATOR

(NX-200/ NX-300/ NX-200G/ NX-300G ONLY)

The signal strength indicator displays the strength of received
calls. No icon appears when no signal is available.
30
(NX-200S/ NX-300S)
Lights Orange
Suffi cient

(NX-200/ NX-300/ NX-200G/ NX-300G)

Suffi cient
Lights Red
Low
Low
Blinks Red
Very low
Very low