Table of Contents
Advertisement
z4
Movie Servo AF
With this function enabled, the camera focuses on the subject
continuously during movie shooting. The default setting is [Enable].
When [Enable] is set:
The camera focuses on the subject continuously even when you
are not pressing the shutter button halfway.
If you want to keep the focus at a specific point or if you do not
want the lens mechanical sound to be recorded, you can
temporarily stop Movie Servo AF as follows.
• Tap [Z] on the screen's bottom left.
• If you assign [Pause Movie Servo AF] (p.500) to <0>, under
[8C.Fn III-4: Custom controls], you can press <0> to pause
the Movie Servo AF. When you press <0> again, Movie Servo
AF will resume.
• If you assign a button to [AF stop] (p.500), you can pause the
Movie Servo AF while holding that button down. When you let go
of the button, Movie Servo AF will resume.
When Movie Servo AF is paused, if you return to movie shooting
after operations such as pressing the <M> or <x> button or
changing the AF method, Movie Servo AF will resume.
When the Live View shooting/Movie
shooting switch is set to <k>, the [z4]
tab will be displayed as the menu options
exclusive to movie shooting. (In Basic
Zone modes, it will be the [z2] tab.)
3 Menu Function Settings
373
Advertisement
Table of Contents
