L Erasing Images - Canon EOS 6D Mark II Instruction Manual

L Erasing Images

You can either select and erase unnecessary images one by one or
erase them in one batch. Protected images (p.409) will not be erased.
Once an image is erased, it cannot be recovered. Make sure you no
longer need the image before erasing it. To prevent important images
from being erased accidentally, protect them. Note that erasing a
RAW+JPEG image will erase both the RAW and JPEG images.
Erasing a Single Image
If the search conditions are set with [32: Set image search conditions]
(p.402), only the found images will be displayed.
430
Select the image to be erased.
1
Press the <x> button to play back
images.
Turn the <5> dial to select the
image to be erased.
Press the <L> button.
2
The Erase menu will appear.
Erase the image.
3
Select [Erase], then press <0>. The
image displayed will be erased.