Exposure Control - Canon EOS 6D Mark II Instruction Manual

Specifications
• Autofocus (during viewfinder shooting)
Type:
AF points:
Focusing brightness
range:
Focus operation:
AF area selection mode: Single-point Spot AF (manual selection), Single-point AF
AF point automatic
selection conditions:
AI Servo AF
characteristics:
AF fine adjustment:
AF-assist beam:

• Exposure Control

Metering mode:
Metering brightness
range:
570
TTL secondary image-registration, phase-difference
detection with the dedicated AF sensor
Max. 45 points (Cross-type AF point: Max. 45 points)
* Number of available AF points, Dual cross-type AF
points, and Cross-type AF points vary depending on
the lens used.
* Dual cross-type focusing at f/2.8 with center AF point
when Group A (of the AF groups) lenses are used.
EV -3 - 18 (with the center AF point supporting f/2.8,
One-Shot AF, room temperature, ISO 100)
One-Shot AF, AI Servo AF, AI Focus AF, Manual focusing
(MF)
(manual selection), Zone AF (manual selection of zone),
Large zone AF (manual selection of zone), Automatic
selection AF
Automatic AF point selection possible based on color
information equivalent to human skin-tone
Characteristics can be set with Custom Functions for
Tracking sensitivity, Acceleration/deceleration tracking,
and AF point auto switching
AF Microadjustment (All lenses by the same amount,
Adjust by lens)
With the EOS-dedicated external Speedlite
Approx. 7,560-pixel RGB+IR metering sensor and
63-zone TTL open-aperture metering
• Evaluative metering (linked to all AF points)
• Partial metering (approx. 6.5% of viewfinder at center)
• Spot metering (approx. 3.2% of viewfinder at center)
• Center-weighted average metering
EV 1 - 20 (at room temperature, ISO 100)