Advertisement
SPECIFIC SERVICE INSTRUCTIONS
1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1: BACK CABINET (Refer to Fig. 1-1)
1. Remove the 7 screws 1.
2. Remove the screw 2 which are used for holding the Back
Cabinet.
3. Remove the AC cord from the AC cord hook 3.
4. Remove the Back Cabinet in the direction of arrow.
1
1
1
1
2
1
1-2: CRT PCB (Refer to Fig. 1-2)
CAUTION: BEFORE REMOVING THE ANODE CAP, DISCHARGE
ELECTRICITY BECAUSE IT CONTAINS HIGH
VOLTAGE.
BEFORE ATTEMPTING TO REMOVE OR REPAIR
ANY PCB, UNPLUG THE POWER CORD FROM THE
AC SOURCE.
1. Remove the Anode Cap.
(Refer to REMOVAL OF ANODE CAP)
2. Disconnect the following connector:
(CP801).
3. Remove the CRT PCB in the direction of arrow.
Front Cabinet
DISASSEMBLY INSTRUCTIONS
Front Cabinet
1
1
3
Back Cabinet
Fig. 1-1
CRT PCB
CP805
Fig. 1-2
1-3: AV PCB/DVD BLOCK (Refer to Fig. 1-3)
1. Remove the 2 screws 1.
2. Disconnect the following connectors:
(CP104, CP301, CP302, CP401 and CP3800).
3. Remove the AV PCB/DVD Block in the direction of arrow.
Front Cabinet
1-4: DVD BLOCK (Refer to Fig. 1-4)
1. Remove the 11 screws 1.
2. Remove the Top Shield in the direction of arrow (A).
3. Disconnect the following connectors:
(CP8001 and CP8002).
4. Remove the 4 screws 2.
5. Remove the DVD Block in the direction of arrow (B).
6. Remove the 2 screws 3.
7. Remove the Jack Shield.
8. Remove the AV PCB in the direction of arrow (C).
1
1
1
1
1
1
(A)
CP8001
AV PCB
Jack Shield
No. 52133
1
1
CP3800
CP301
CP104
CP302
AV PCB/DVD Block
1
1
1
Top Shield
1
2
1
2
2
DVD Block
2
CP8002
(B)
(C)
Plate Bottom
AV-20FD24
CP401
Fig. 1-3
3
3
Fig. 1-4
7
Advertisement
