Advertisement
AV-20FD24
1-5: DVD PCB/DVD DECK (Refer to Fig. 1-5)
1. Make the short circuit on the position as shown Fig. 1-5 using a
soldering. If you remove the DVD Deck with no soldering, the
Laser may be damaged.
2. Unlock the 2 supports 1.
3. Remove the Front Tray Plate in the direction of arrow (A).
4. Disconnect the following connectors:
(CP2001, CP2301 and CP2302).
5. Remove the 4 screws 2.
6. Remove the DVD Deck in the direction of arrow (B).
7. Remove the 4 screws 3.
8. Remove the DVD PCB in the direction of arrow (C).
1
Front Tray Plate
1
2
(A)
2
Deck CD
3
3
3
DVD PCB
CP2301
NOTE
When the installation of the DVD Deck, remove all the soldering on
the short circuit position after the connection of Pick Up PCB and
DVD PCB connector.
8
Pick Up PCB
2
2
Make the sort circuit
using a soldering.
(B)
3
CP2001
CP2302
(C)
Deck Angle
Fig. 1-5
No. 52133
Advertisement
