DP-210
Checking the accessories
Check the DP-210 parts.
Setting the DP-210
Connector installation screw
Inch-type hexagonal lock screws are installed in the connector for serial cable connection of DP-210.
If millimeter-type lock screws are needed, use the millimeter-type lock screws of the accessory.
Notch (one or more lines)
inch-type
Jumper setting
Set the jumpers as follows:
JP1
JP2
1-2
1-2
2-3
2-3
34
DP-210
Extension power cable
millimeter-type
For connecting both the TM printer and the DP-210. (Default setting)
Set this when using a standalone connection.
Support
Extension support
RS-232C connector installation screw
(millimeter type)
Installation screw
Description