Saas; Adapters - Honeywell Thor VM2 User Manual

SaaS

Use to configure the Enabler to connect with Avalanche on Demand. This is a Software-as-a-Service version of Ava-
lanche. Using either of the SaaS configuration options below assumes the user has registered with Wavelink.
Disable SaaS
Scan Configure
SaaS
Manually Config-
ure SaaS

Adapters

Note: Review the network settings configuration utilities and the default values before setting All Adapters to Enable in
the Adapters applet.
Manage Network
Settings
Manage Wireless
Settings
Current Adapter
7 - 12
No SaaS connection is used.
Scan bar codes printed from within the Avalanche Console to configure the Enabler for the SaaS
connection.
Manually enter the SaaS connection information. Enter the server address on the Connection tab
and the customer ID in the Company text box.
When enabled, the Enabler will control the network settings. This parameter cannot be config-
ured from the Avalanche Mobility Center Console and is enabled by default.
When enabled, the Enabler will control the wireless settings. This parameter cannot be config-
ured from the Avalanche Mobility Center Console and is disabled by default. For Summit clients,
Manage Wireless Settings should not be checked as configuration packages provide more radio
configuration options.
Lists all network adapters currently installed on the Thor VM2.