NEC 120Ef User Manual page 33

2. Fix the S-ATA hard disk drive on the tray with four screws.
Handle
Switch
(pale green)
Disk Lamp (indicates
hard disk drive status)
3. Push the pale green switch (it is located on the handle of the tray in which a hard disk
drive is installed) to release the lock. Then pull out the handle.
4. Hold the hard disk drive (with tray) to be added and the handle securely to insert the
hard disk drive into the slot.
hard disk drive.
Figure 4-2: S-ATA Hard Disk Drive
Note:
Take extreme care not to give vibration or shock to the
Installing Hard Disk Drives 4-3