Bluetooth; Turning On/ Off The Bluetooth Function - Kenwood TH-D74E User Manual

®

Bluetooth

TURNING ON/ OFF THE Bluetooth FUNCTION

You can turn On/ Off the Bluetooth function.
1 Access Menu No. 930.
When the Bluetooth function is turned on, <
on the display.
[On]: Turns on the Bluetooth function.
[Off]: Turns off the Bluetooth function.
Connecting with a Headset (Pairing)
When connecting the transceiver with a Bluetooth compatible
device, you need to fi rst pair the devices. Pairing is a function
for registering devices for a Bluetooth connection as a
connection pair.
The following explains how to connect via Bluetooth using the
example of a commercially available headset.
Note:
◆ For the device to be connected with the transceiver via Bluetooth,
be sure to purchase a headset or other device that is compatible
with Bluetooth. Also refer to the instruction manual of the device.
◆ A connection may not be possible depending on the specifi cations
or settings of the device. There is no guarantee that the
transceiver will be able to communicate wirelessly with all
Bluetooth devices.
1 Access Menu No. 930 to turn on the Bluetooth function.
2 Place the headset (device to be connected) near the
transceiver.
• Place it within approximately 1 meter each other.
3 Set the headset (device to be connected) to the pairing
mode (Bluetooth connection standby state).
• For how to enable the pairing mode, refer to the
instruction manual of the headset (device to be
connected).
4 Access Menu No. 932. A device search begins and the
recognized device is added to the Bluetooth device search
list.
5 Select the device to be connected.
When connecting the device that is already selected, move
to step 6.
• If you select the device and press [
device information screen appears. You can confi rm the
device name, device address, and device class.
40
6 Press [A/B].
[Connecting. . .] screen appears.
7 Make the connection operation by the headset.
When the headset is connected, <
> appears
display.
• Since the connection operation depends on the
Note:
◆ The volume of the headset can not be adjusted by the [VOL]
control of the transceiver. Adjust the volume by the headset
volume.
Entering the PIN Code
When searching for the device, you may be requested to
enter the PIN code depending on the device to be connected.
When Requested to Enter the PIN Code
The PIN code input screen appears. Refer to the
instruction manual of the device to be connected and
enter the PIN code using the number keys and press
[A/B].
If you press [
displayed, the Bluetooth device information screen
appears. You can confi rm the device name, device
address, and device class.
Note:
◆ The PIN code differs depending on the device to be connected.
Refer to the instruction manual of the Bluetooth device and enter
the correct PIN code.
Disconnecting from a Bluetooth device
You can disconnect a connected Bluetooth device to stop
communication.
1 Access Menu No. 933.
2 Select the device.
• When disconnecting the device that is already selected,
], the Bluetooth
3 Press [A/B].
The disconnection process begins.
• If 30 seconds or more passes during the disconnection
headset, refer to the instruction manual of the headset.
] when the PIN code input screen is
move to step 3. If you press [
information screen appears. If you select the device to
be disconnected and press [
information screen appears. You can confi rm the device
name, device address, and device class. Pressing
[MODE] returns to the previous screen.
process, the Bluetooth device disconnection failure
screen appears. Pressing [A/B] returns to the
frequency screen. Perform the procedure again from
step 1.
> appears on the
], the Bluetooth device
], the Bluetooth device