Page 1
INSTALLATION The work on installation must be carried out by competent and qualified installers according to the local regulation in force. Any modifications to the domestic electrical main which maybe necessary for the installation of the appliance should be carried out only by a qualified technician. ...
Page 2
Place the cooker on a piece of polystyrene packaging or similar exposing the base for fitting the feet. Fit the 4 feet by screwing them tightly into the base as shown below. Level the cooker by screwing the feet in or out. To prevent damaging the adjustable feet, ensure the cooker is always lifted by two people.
INSTALLATION ENVIRONMENT WARNING - This unit can be installed and can work only in constantly ventilated rooms, according to the national rules in force. In order for the gas cooker to work properly, it is necessary that sufficient air for gas combustion can flow naturally into the room.
The protection fuse and the domestic wiring are suitable to carry the total electric load of the cooker. The electricity supply network (mains) has an efficient earth connecting according to the established rules and existing regulations. The cooker wire is long enough to reach the socket from where your cooker is situated.
Page 5
The appliance will become hot during operation and can remain hot for a long time after being switched off. Supervise children and pay attention that they do not touch surfaces or remain in the vicinity of the appliance when in use or when not completely cooled. WARNING - Ensure the anti-tip chain is installed correctly to avoid the possibility of the cooker falling over and injuring children.