Wired Network; Connect The Network Cable - Brother ADS-2600W Quick Setup Manual

Wired Network

For wired network interface users
®
(Windows XP Home/XP Professional/Windows Vista
8
Before you install
Make sure that your computer and machine are on
and you are logged on with Administrator rights.
9
Connect the network
cable
a
USB
b
8
® ®
/Windows 7)
10
Install MFL-Pro Suite
a
Put the supplied DVD-ROM into your
DVD-ROM drive. If the model name screen
appears, choose your machine. If the language
screen appears, choose your language.
b
The DVD-ROM Top Menu will appear. Click
Install MFL-Pro Suite and click Yes if you
accept the license agreements. Follow the
on-screen instructions.
c
Choose Wired Network Connection
(Ethernet), and then click Next.
d
When Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
(Recommended) and click Next.
If you are using a firewall other than the
®
Windows Firewall, see the instructions
provided with your firewall software for
information on how to add the following
network ports.
 For network scanning, add UDP port 54925.
 If you still have trouble with your network
connection, add UDP port 137 and 161.
Note
• If your machine is not found over the network,
confirm your settings by following the
on-screen instructions.
• If there is more than one of the same model
connected on your network, the IP Address
and Node Name will be displayed to help you
identify the machine.
e
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.
f
When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
®
Windows