ABB 615 Series ANSI Manual page 54

Section 4
Modbus parameters and diagnostics
Parameter Values (Range)
TCPWriteAuthority 0=No clients
1=Reg. clients
2=All clients
EventID 0=Address
1=UID
TimeFormat 0=UTC
1=Local
ClientIP1
ClientIP2
ClientIP3
ClientIP4
ClientIP5
CtlStructPWd1
CtlStructPWd2
CtlStructPWd3
CtlStructPWd4
CtlStructPWd5
CtlStructPWd6
CtlStructPWd7
CtlStructPWd8
Internal Overflow 0=False
1=True
1. The amount of available control structures may vary depending on the IED type.
48
Unit Step
1MAC052634-MB D
Default Description
2=All clients Write authority
setting for Modbus
TCP/IP clients
0=Address Event ID selection
1=Local Time format for
Modbus time stamps
000.000.000.000 Modbus Registered
Client 1
000.000.000.000 Modbus Registered
Client 2
000.000.000.000 Modbus Registered
Client 3
000.000.000.000 Modbus Registered
Client 4
000.000.000.000 Modbus Registered
Client 5
**** Password for
Modbus control
struct 1
**** Password for
Modbus control
struct 2
**** Password for
Modbus control
struct 3
**** Password for
Modbus control
struct 4
**** Password for
Modbus control
struct 5
**** Password for
Modbus control
struct 6
**** Password for
Modbus control
struct 7
**** Password for
Modbus control
struct 8
0=False Modbus Internal
Overflow:
TRUE-System level
overflow occurred
(indication only)
615/620 series ANSI
Communication Protocol Manual
1