ABB Relion 615 Series Manual
  1. Manuals
  2. Brands
  3. ABB Manuals
  4. DC Drives
  5. Relion 615 series
  6. Manual

ABB Relion 615 Series Manual

Hide thumbs Also See for Relion 615 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
®
Relion
615 series
Grid Automation
Recloser Protection and Control RER615
DNP3 Point List Manual

Advertisement

Table of Contents
loading

Related Manuals for ABB Relion 615 Series

Summary of Contents for ABB Relion 615 Series

  • Page 1 ® Relion 615 series Grid Automation Recloser Protection and Control RER615 DNP3 Point List Manual...
  • Page 3 Document ID: 1MRS757823 Issued: 2013-09-17 Revision: A Product version: 1.0 © Copyright 2013 ABB. All rights reserved...
  • Page 4 Copyright This document and parts thereof must not be reproduced or copied without written permission from ABB, and the contents thereof must not be imparted to a third party, nor used for any unauthorized purpose. The software or hardware described in this document is furnished under a license and may be used, copied, or disclosed only in accordance with the terms of such license.
  • Page 5 ABB is not liable for any such damages and/or losses.
  • Page 6 (EMC Directive 2004/108/EC) and concerning electrical equipment for use within specified voltage limits (Low-voltage directive 2006/95/EC). This conformity is the result of tests conducted by ABB in accordance with the product standards EN 50263 and EN 60255-26 for the EMC directive, and with the product standards EN 60255-1 and EN 60255-27 for the low voltage directive.

  • Page 7: Table Of Contents

    Table of contents Table of contents Section 1 Introduction...............7 This manual..................7 Intended audience................7 Product documentation...............7 Product documentation set............7 Document revision history.............8 Related documentation..............8 Symbols and conventions..............8 Symbols..................8 Document conventions..............9 Functions, codes and symbols............9 Section 2 DNP3 data mappings.............15 Overview...................15 Supported functions................15 Binary inputs..................17 System functions.................18 CTRL.LLN0 Local/remote state (also present in DNP IIN-...
  • Page 8 Table of contents Protection functions..............22 LD0.LEDPTRC1 Global protection signals......22 LD0.TRPPTRC1 Global conditioning (1)........22 LD0.TRPPTRC2 Global conditioning (2)........22 LD0.DEFHPDEF1 Directional earth-fault protection - high stage 1................22 LD0.DPHHPDOC1 Three-phase directional overcurrent protection - high stage (1)............23 LD0.EFHPTOC1 Non-directional earth-fault and sensitive earth-fault protection - high stage 1......23 LD0.EFIPTOC1 Non-directional earth-fault and sensitive earth-fault protection - instantaneous stage 1......23 LD0.EFPADM1 Admittance-based earth-fault protection...
  • Page 9 Table of contents LD0.PHPTOV1 Phase overvoltage protection - stage 1..28 LD0.PHPTOV2 Phase overvoltage protection - stage 2..28 LD0.PHPTOV3 Phase overvoltage protection - stage 3..28 LD0.PHPTUV1 Phase undervoltage protection - stage 1.....................28 LD0.PHPTUV2 Phase undervoltage protection - stage 2.....................28 LD0.PHPTUV3 Phase undervoltage protection - stage 3.....................29 LD0.PSPTUV1 Positive-sequence undervoltage protection - stage 1..............29...
  • Page 10 Table of contents LD0.SPCLGGIO1 Multipurpose binary outputs - status (1)...................35 LD0.SPCRGGIO1 Multipurpose binary outputs - status (1)...................36 Physical and raw I/O data............36 LD0.XGGIO100 Physical I/O..........36 LD0.XGGIO110 Physical I/O..........37 LD0.XGGIO120 Physical I/O..........37 Binary outputs...................37 System functions.................38 LD0.LLN0/LPHD1 Reset indications and LEDs, reset device..................38 LD0.DNPGGIO1 Parameter setting group control....38 Switchgear functions..............38...
  • Page 11 Table of contents CTRL.ESSXSWI2 Earth switch 2, 4-pole (2 bit) position values..................44 Metering and measurand functions..........45 LD0.CMMXU1 Phase currents (1)..........45 LD0.RESCMMXU1 Residual current (1)........45 LD0.CSMSQI1 Sequence of currents........45 LD0.VMMXU1 Voltage measurement ........45 LD0.VMMXU2 Voltage measurement (2).......46 LD0.VSMSQI1 Sequence of voltage measurement....46 LD0.VSMSQI2 Sequence of voltage measurement (2)..47 LD0.PEMMTR1 Power measurement and accumulated power values................47...

  • Page 13: Section 1 Introduction

    Section 1 1MRS757823 A Introduction Section 1 Introduction This manual The point list manual describes the outlook and properties of the data points specific to the IED. The manual should be used in conjunction with the corresponding communication protocol manual. Intended audience This manual addresses the communication system engineer or system integrator responsible for pre-engineering and engineering for communication setup in a...

  • Page 14: Document Revision History

    1.3.2 Document revision history Document revision/date Product version History A/2013-09-17 First release Download the latest documents from the ABB Website http://www.abb.com/substationautomation. 1.3.3 Related documentation Name of the document Document ID DNP3 Communication Protocol Manual 1MRS757820 Symbols and conventions 1.4.1...

  • Page 15: Document Conventions

    Section 1 1MRS757823 A Introduction of a hazard which could result in corruption of software or damage to equipment or property. The information icon alerts the reader of important facts and conditions. The tip icon indicates advice on, for example, how to design your project or how to use a certain function.
  • Page 16 Section 1 1MRS757823 A Introduction Table 1: Functions included in the IED Function IEC 61850 IEC 60617 IEC-ANSI Protection Three-phase non-directional overcurrent protection, low stage, FPHLPTOC1 3I> (1) 51P-1 (1) instance 1 Three-phase non-directional overcurrent protection, high stage, PHHPTOC1 3I>> (1) 51P-2 (1) instance 1 Three-phase non-directional...
  • Page 17 Section 1 1MRS757823 A Introduction Function IEC 61850 IEC 60617 IEC-ANSI Residual overvoltage protection, ROVPTOV1 Uo> (1) 59G (1) instance 1 Residual overvoltage protection, ROVPTOV2 Uo> (2) 59G (2) instance 2 Three-phase undervoltage PHPTUV1 3U< (1) 27 (1) protection, instance 1 Three-phase undervoltage PHPTUV2 3U<...
  • Page 18 Section 1 1MRS757823 A Introduction Function IEC 61850 IEC 60617 IEC-ANSI Disconnector position indication, DCSXSWI1 I <-> O DC (1) I <-> O DC (1) instance 1 Disconnector position indication, DCSXSWI2 I <-> O DC (2) I <-> O DC (2) instance 2 Earthing switch indication, instance 1 ESSXSWI1...
  • Page 19 Section 1 1MRS757823 A Introduction Function IEC 61850 IEC 60617 IEC-ANSI Time delay off (8 pcs), instance 1 TOFGAPC1 TOF (1) TOF (1) Time delay off (8 pcs), instance 2 TOFGAPC2 TOF (2) TOF (2) Time delay on (8 pcs), instance 1 TONGAPC1 TON (1) TON (1)

  • Page 21: Section 2 Dnp3 Data Mappings

    Section 2 1MRS757823 A DNP3 data mappings Section 2 DNP3 data mappings Overview This document describes the DNP3 data points and structures available in the IED. The data points are unmapped as a default on the DNP3 level. The point lists describe a superset of all DNP3 data available through the standard configuration/s including the optional functionalities.
  • Page 22 Section 2 1MRS757823 A DNP3 data mappings Function block RE01 RE02 EFPADM2 EFPADM3 WPWDE1 WPWDE2 WPWDE3 HAEFPTOC1 NSPTOC1 ● ● NSPTOC2 ● ● PDNSPTOC1 ● ● ROVPTOV1 ● ● ROVPTOV2 PHPTUV1 PHPTUV2 PHPTUV3 PHPTOV1 PHPTOV2 PHPTOV3 PSPTUV1 NSPTOV1 FRPFRQ1 FRPFRQ2 T1PTTR1 ●...

  • Page 23: Binary Inputs

    Section 2 1MRS757823 A DNP3 data mappings Function block RE01 RE02 DCSXSWI1 ● ● DCSXSWI2 ● ● ESSXSWI1 ● ● ESSXSWI2 ● ● DARREC1 ● ● SECRSYN1 SSCBR1 ● ● TCSSCBR1 ● ● TCSSCBR2 ● ● SEQRFUF1 ● ● CMMXU1 ●...

  • Page 24: System Functions

    Section 2 1MRS757823 A DNP3 data mappings 2.3.1 System functions 2.3.1.1 CTRL.LLN0 Local/remote state (also present in DNP IIN-bits) Table 4: CTRL.LLN0 Local/remote state (also present in DNP IIN-bits) IEC 61850 name SA name Description Values CTRL.LLN0 .Loc.stVal Remote/Local state 0/1=Rem/Loc 2.3.1.2 LD0.LLN0 Settings supervision...

  • Page 25: Sensors And Monitoring Functions

    Section 2 1MRS757823 A DNP3 data mappings IEC 61850 name SA name Description Values .OpEx.general TRBU Failure ext.trip 1=Failure .OpIn.general TRRET Operate, re-trip 1=Operate .Str.general CB_FAULT_AL Start, timer running 1=Start 2.3.3 Sensors and monitoring functions 2.3.3.1 LD0.SSCBR1 Circuit-breaker condition monitoring Table 8: LD0.SSCBR1 Circuit-breaker condition monitoring IEC 61850 name...

  • Page 26: Metering And Measurand Functions

    Section 2 1MRS757823 A DNP3 data mappings 2.3.4 Metering and measurand functions 2.3.4.1 LD0.CMMXU1 Phase currents (1) limit supervision Table 11: LD0.CMMXU1 Phase currents (1) limit supervision IEC 61850 name SA name Description Values LD0.CMMXU1 .HiAlm.stVal HIGH_ALARM High alarm 1=Alarm .HiWrn.stVal HIGH_WARN High warning...

  • Page 27: Power Quality Functions

    Section 2 1MRS757823 A DNP3 data mappings 2.3.5 Power quality functions 2.3.5.1 LD0.CMHAI1 Power quality - current total demand distortion Table 15: LD0.CMHAI1 Power quality - current total demand distortion IEC 61850 name SA name Description Values LD0.CMHAI1 .Alm.stVal ALARM Distortion alarm 10=Alarm 2.3.5.2...

  • Page 28: Protection Functions

    Section 2 1MRS757823 A DNP3 data mappings 2.3.6 Protection functions 2.3.6.1 LD0.LEDPTRC1 Global protection signals Table 19: LD0.LEDPTRC1 Global protection signals IEC 61850 name SA name Description Values LD0.LEDPTRC1 Global protection signals .Op.general -General Operate 1=Operate .Op.phsA -phsA Operate 1=Operate .Op.phsB -phsB Operate 1=Operate...

  • Page 29: Ld0.Dphhpdoc1 Three-Phase Directional Overcurrent Protection - High Stage (1)

    Section 2 1MRS757823 A DNP3 data mappings 2.3.6.5 LD0.DPHHPDOC1 Three-phase directional overcurrent protection - high stage (1) Table 23: LD0.DPHHPDOC1 Three-phase directional overcurrent protection - high stage (1) IEC 61850 name SA name Description Values LD0.DPHHPTOC1 High stage (1) .Op.general OPERATE -Operate 1=Operate...

  • Page 30: Ld0.Efpadm2 Admittance-Based Earth-Fault Protection (2)

    Section 2 1MRS757823 A DNP3 data mappings 2.3.6.9 LD0.EFPADM2 Admittance-based earth-fault protection (2) Table 27: LD0.EFPADM2 Admittance-based earth-fault protection (2) IEC 61850 name SA name Description Values LD0.EFPADM2 .Str.general START Stage2 start 1=Start .Op.general OPERATE Stage2 operate 1=Operate 2.3.6.10 LD0.EFPADM3 Admittance-based earth-fault protection (3) Table 28: LD0.EFPADM3 Admittance-based earth-fault protection (3) IEC 61850 name...

  • Page 31: Protection - Low Stage (1)

    Section 2 1MRS757823 A DNP3 data mappings 2.3.6.14 LD0.FEFLPTOC1 FA-Non-directional earth-fault protection – low stage (1) Table 32: LD0.FEFLPTOC1 FA-Non-directional earth-fault protection – low stage (1) IEC 61850 name SA name Description Values LD0.FEFLPTOC1 Low stage (1) .Op.general OPERATE -Operate 1=Operate .Str.general START...

  • Page 32: Ld0.Frpfrq2 Frequency Protection (2)

    Section 2 1MRS757823 A DNP3 data mappings 2.3.6.18 LD0.FRPFRQ2 Frequency protection (2) Table 36: LD0.FRPFRQ2 Frequency protection (2) IEC 61850 name SA name Description Values LD0.FRPTRC2 .Str.general START Stage start 1=Start LD0.FRPTOF2 Overfrequency .Op.general OPR_OFRQ -Operate 1=Operate LD0.FRPTUF2 Underfrequency .Op.general OPR_UFRQ -Operate 1=Operate...

  • Page 33: Ld0.Nsptoc2 Negative-Sequence Overcurrent Protection (2)

    Section 2 1MRS757823 A DNP3 data mappings 2.3.6.22 LD0.NSPTOC2 Negative-sequence overcurrent protection (2) Table 40: LD0.NSPTOC2 Negative-sequence overcurrent protection (2) IEC 61850 name SA name Description Values LD0.NSPTOC2 .Op.general OPERATE Stage operate 1=Operate .Str.general START Stage start 1=Start 2.3.6.23 LD0.NSPTOV1 Negative-sequence overvoltage protection - stage 1 Table 41: LD0.NSPTOV1 Negative-sequence overvoltage protection - stage 1 IEC 61850 name...

  • Page 34: Ld0.Phptov1 Phase Overvoltage Protection - Stage 1

    Section 2 1MRS757823 A DNP3 data mappings 2.3.6.27 LD0.PHPTOV1 Phase overvoltage protection - stage 1 Table 45: LD0.PHPTOV1 Phase overvoltage protection - stage 1 IEC 61850 name SA name Description Values LD0.PHPTOV1 .Op.general OPERATE Stage operate 1=Operate .Str.general START Stage start 1=Start 2.3.6.28 LD0.PHPTOV2 Phase overvoltage protection - stage 2...

  • Page 35: Ld0.Phptuv3 Phase Undervoltage Protection - Stage 3

    Section 2 1MRS757823 A DNP3 data mappings 2.3.6.32 LD0.PHPTUV3 Phase undervoltage protection - stage 3 Table 50: LD0.PHPTUV3 Phase undervoltage protection - stage 3 IEC 61850 name SA name Description Values LD0.PHPTUV3 .Op.general OPERATE Stage operate 1=Operate .Str.general START Stage start 1=Start 2.3.6.33 LD0.PSPTUV1 Positive-sequence undervoltage protection - stage 1...

  • Page 36: Ld0.Wpwde1 Wattmetric-Based Earth-Fault Protection (1)

    Section 2 1MRS757823 A DNP3 data mappings 2.3.6.37 LD0.WPWDE1 Wattmetric-based earth-fault protection (1) Table 55: LD0.WPWDE1 Wattmetric-based earth-fault protection (1) IEC 61850 name SA name Description Values LD0.WPDSE1 .Str.general START Stage 1 start 1=Start .Op.general OPERATE Stage 1 operate 1=Operate 2.3.6.38 LD0.WPWDE2 Wattmetric-based earth-fault protection (2) Table 56:...

  • Page 37: Ld0.Darrec1 Autorecloser

    Section 2 1MRS757823 A DNP3 data mappings 2.3.7.2 LD0.DARREC1 Autorecloser Table 59: LD0.DARREC1 Autorecloser IEC 61850 name SA name Description Values LD0.DARREC1 .PrgRec1.stVal INPRO_1 AR 1st reclose 1=In progress .PrgRec2.stVal INPRO_2 AR 2nd reclose 1=In progress .PrgRec3.stVal INPRO_3 AR 3rd reclose 1=In progress .PrgRec4.stVal INPRO_4...

  • Page 38: Ld0.Secrsyn1 Synchrocheck

    Section 2 1MRS757823 A DNP3 data mappings 2.3.7.4 LD0.SECRSYN1 Synchrocheck Table 61: LD0.SECRSYN1 Synchrocheck IEC 61850 name SA name Description Values LD0.SECRSYN1 .SynPrg.stVal SYNC_INPRO Synch in progress 1=In progress .FailCmd.stVal CMD_FAIL_AL CB close request failed 1=Failed .FailSyn.stVal CL_FAIL_AL CB close command failed 1=Failed 2.3.8 Generic functions...

  • Page 39: Ld0.Mapgapc1 Multipurpose Analog Protection Function (1)

    Section 2 1MRS757823 A DNP3 data mappings 2.3.8.3 LD0.MAPGAPC1 Multipurpose analog protection function (1) Table 64: LD0.MAPGAPC1 Multipurpose analog protection function (1) IEC 61850 name SA name Description Values LD0.MAPGAPC1 .Op.general OPERATE Stage operate 1 = Operate .Str.general START Stage start 1 = Start 2.3.8.4 LD0.MAPGAPC2 Multipurpose analog protection function (2)

  • Page 40: Ld0.Mapgapc6 Multipurpose Analog Protection Function (6)

    Section 2 1MRS757823 A DNP3 data mappings 2.3.8.8 LD0.MAPGAPC6 Multipurpose analog protection function (6) Table 69: LD0.MAPGAPC6 Multipurpose analog protection function (6) IEC 61850 name SA name Description Values LD0.MAPGAPC6 .Op.general OPERATE Stage operate 1 = Operate .Str.general START Stage start 1 = Start 2.3.8.9 LD0.SPCGGIO1 Multipurpose binary outputs - status (1)

  • Page 41: Ld0.Spclggio1 Multipurpose Binary Outputs - Status (1)

    Section 2 1MRS757823 A DNP3 data mappings IEC 61850 name SA name Description Values .SPCS06.stVal Output 6 state 0/1=Off/On .SPCS07.stVal Output 7 state 0/1=Off/On .SPCS08.stVal Output 8 state 0/1=Off/On .SPCS09.stVal Output 9 state 0/1=Off/On .SPCS10.stVal Output 10 state 0/1=Off/On .SPCS11.stVal Output 11 state 0/1=Off/On .SPCS12.stVal...

  • Page 42: Ld0.Spcrggio1 Multipurpose Binary Outputs - Status (1)

    Section 2 1MRS757823 A DNP3 data mappings 2.3.8.12 LD0.SPCRGGIO1 Multipurpose binary outputs - status (1) Table 73: LD0.SPCRGGIO1 Multipurpose binary outputs - status (1) IEC 61850 name SA name Description Values LD0.SPCRGGIO1 .SPCS01.stVal Output 1 state 0/1=Off/On .SPCS02.stVal Output 2 state 0/1=Off/On .SPCS03.stVal Output 3 state...

  • Page 43: Ld0.Xggio110 Physical I/O

    Section 2 1MRS757823 A DNP3 data mappings 2.3.9.2 LD0.XGGIO110 Physical I/O Table 75: LD0.XGGIO110 Physical I/O IEC 61850 name SA name Description Values LD0.XGGIO110 .Ind1.stVal X110-Input 1 1/0=ON/OFF .Ind2.stVal X110-Input 2 1/0=ON/OFF .Ind3.stVal X110-Input 3 1/0=ON/OFF .Ind4.stVal X110-Input 4 1/0=ON/OFF .Ind5.stVal X110-Input 5 1/0=ON/OFF...

  • Page 44: System Functions

    Section 2 1MRS757823 A DNP3 data mappings 2.4.1 System functions 2.4.1.1 LD0.LLN0/LPHD1 Reset indications and LEDs, reset device Table 78: LD0.LLN0/LPHD1 Reset indications and LEDs, reset device IEC 61850 name SA name Description Type LD0.LLN0 .LEDRs1.Oper.ctlVal Reset indications and LEDs .LEDRs2.Oper.ctlVal Reset alarm LEDs LD0.LPHD1...

  • Page 45: Sensors And Monitoring Functions

    Section 2 1MRS757823 A DNP3 data mappings 2.4.3 Sensors and monitoring functions 2.4.3.1 LD0.SSCBR1 Reset signals of CB condition monitoring Table 81: LD0.SSCBR1 Reset signals of CB condition monitoring IEC 61850 name SA name Description Type LD0.SSCBR1 .RsAccAPwr.Oper.ctlVal RST_IPOW Reset accum. energy .RsCBWear.Oper.ctlVal RST_CB_WEAR Reset CB life and op.

  • Page 46: Generic Functions

    Section 2 1MRS757823 A DNP3 data mappings 2.4.6 Generic functions 2.4.6.1 LD0.SPCGGIO1 Multipurpose binary outputs (1) The binary outputs can be configured either as pulse- or persistent-type outputs. Pulse- type outputs are triggered with the write value "1". Persistent-type outputs can be written with both values "1"...

  • Page 47: Ld0.Spcrggio1 Multipurpose Binary Outputs (1)

    Section 2 1MRS757823 A DNP3 data mappings IEC 61850 name SA name Description Type .SPCS04.ctlVal Output 4 control On/Off .SPCS05.ctlVal Output 5 control On/Off .SPCS06.ctlVal Output 6 control On/Off .SPCS07.ctlVal Output 7 control On/Off .SPCS08.ctlVal Output 8 control On/Off .SPCS09.ctlVal Output 9 control On/Off .SPCS10.ctlVal...

  • Page 48: Ld0.Srgapc1 Multipurpose Binary Outputs - Flip-Flop Resets (1)

    Section 2 1MRS757823 A DNP3 data mappings 2.4.6.4 LD0.SRGAPC1 Multipurpose binary outputs - flip-flop resets (1) Table 88: LD0.SRGAPC1 Multipurpose binary outputs - flip-flop resets (1) IEC 61850 name SA name Description Type LD0.SRGAPC1 .Rs1.ctlVal Reset flip-flop 1 .Rs2.ctlVal Reset flip-flop 2 .Rs3.ctlVal Reset flip-flop 3 .Rs4.ctlVal...

  • Page 49: System Functions

    Section 2 1MRS757823 A DNP3 data mappings Column name Description Values The value range of the original IEC 61850 data. Scaling is needed to convert floating point data into DNP3 integer values. Scaling type selected as default. Default “R” means ratio scaling. See the DNP3 communication protocol manual for details.

  • Page 50: Switchgear Functions

    Section 2 1MRS757823 A DNP3 data mappings 2.5.2 Switchgear functions 2.5.2.1 CTRL.CBCSWI1 CB 4-pole (2 bit) position value Table 94: CTRL.CBCSWI1 CB 4-pole (2 bit) position value IEC 61850 name SA name Description Values Arg 1,2,3,4 CTRL.CBCSWI1 Intermediate=0; Off=1; On=2; .Pos.stVal POSITION Bad=3...

  • Page 51: Metering And Measurand Functions

    Section 2 1MRS757823 A DNP3 data mappings 2.5.3 Metering and measurand functions 2.5.3.1 LD0.CMMXU1 Phase currents (1) Table 99: LD0.CMMXU1 Phase currents (1) IEC 61850 name SA name Description Values Arg 1,2,3,4 LD0.CMMXU1 Phase-to-ground current .A.phsA.instCVal.mag I_INST_A -phsA magnitude 0.00..40.0 [xIn] 0,40,0,4000 .A.phsB.instCVal.mag I_INST_B...

  • Page 52: Ld0.Vmmxu2 Voltage Measurement (2)

    Section 2 1MRS757823 A DNP3 data mappings IEC 61850 name SA name Description Values Arg 1,2,3,4 0.00…4.00 .phsAB.cVal.mag U_DB_AB -phsAB magnitude [xUn] 0,4,0,400 0.00…4.00 .phsBC.cVal.mag U_DB_BC -phsBC magnitude [xUn] 0,4,0,400 0.00…4.00 .phsCA.cVal.mag U_DB_CA -phsCA magnitude [xUn] 0,4,0,400 2.5.3.5 LD0.VMMXU2 Voltage measurement (2) Table 103: LD0.VMMXU2 Voltage measurement (2) IEC 61850 name...

  • Page 53: Ld0.Vsmsqi2 Sequence Of Voltage Measurement (2)

    Section 2 1MRS757823 A DNP3 data mappings 2.5.3.7 LD0.VSMSQI2 Sequence of voltage measurement (2) Table 105: LD0.VSMSQI2 Sequence of voltage measurement (2) IEC 61850 name SA name Description Values Arg 1,2,3,4 LD0.VSMSQI2 Sequence of voltages 0.00…4.00 .SeqV.c1.cVal.mag I1_DB -Positive magnitude [xUn] 0,4,0,400 0.00…4.00...

  • Page 54: Ld0.Haefmhai1 Current Harmonics

    Section 2 1MRS757823 A DNP3 data mappings IEC 61850 name SA name Description Values Arg 1,2,3,4 0/1/3=Off/Ok/ .ISCSO3.stVal LED 3 state Alarm 0,3,0,3 0/1/3=Off/Ok/ .ISCSO4.stVal LED 4 state Alarm 0,3,0,3 0/1/3=Off/Ok/ .ISCSO5.stVal LED 5 state Alarm 0,3,0,3 0/1/3=Off/Ok/ .ISCSO6.stVal LED 6 state Alarm 0,3,0,3 0/1/3=Off/Ok/...

  • Page 55: Protection-Related Functions

    Section 2 1MRS757823 A DNP3 data mappings 2.5.5 Protection-related functions 2.5.5.1 LD0.DARREC1 Autoreclosing values Table 111: LD0.DARREC1 Autoreclosing values IEC 61850 name SA name Description Values Arg 1,2,3,4 LD0.DARREC1 .AutoRecSt.stVal STATUS Autorec. status -2…4 -2,4,-2,4 .ShotPntr.stVal SHOT_PTR Shot pointer value 0…65535 0,65535,0,65535 2.5.5.2...

  • Page 57: Section 3 Dnp3 Protocol Implementation

    Implementation table and the point list tables, provides a complete configuration/interoperability guide for communicating with a device. Table 114: Device profile document DNP3 device profile document Vendor name: ABB Oy Device name: RER615 Highest DNP level supported: Device function: For requests: Level 2+ ○...
  • Page 58 Section 3 1MRS757823 A DNP3 protocol implementation DNP3 device profile document ○ Sometimes ● Configurable as: "Only when reporting event data", or "When reporting event data or multi-fragment messages" Timeouts while waiting for: Data link ○ None ○ Fixed at ____ ○...

  • Page 59: Dnp3 Implementation Table

    Section 3 1MRS757823 A DNP3 protocol implementation DNP3 device profile document ○ Configurable ○ When device restarts ○ Only certain objects ○ When status flags change ○ Sometimes (attach explanation) ○ ENABLE/DISABLE UNSOLICITED No other options are permitted. function codes supported Default counter object/variation: Counters roll over at: ●...
  • Page 60 Section 3 1MRS757823 A DNP3 protocol implementation Table 115: Implementation table OBJECT REQUEST (Library will parse) RESPONSE (Library will respond with) Object Variation Function codes Qualifier codes number number Description Function codes (dec) Qualifier codes (hex) (dec) (hex) Binary 1 (read) 00, 01 (start-stop) input –...
  • Page 61 Section 3 1MRS757823 A DNP3 protocol implementation OBJECT REQUEST (Library will parse) RESPONSE (Library will respond with) 16-bit 1 (read) 00, 01 (start-stop) 129 (response) 00, 01 (start-stop) 2 (default) analog 06 (no range, or all) 17, 28 (index) input 07, 08 (limited qty) 17, 28 (index) 32-bit...
  • Page 62 Section 3 1MRS757823 A DNP3 protocol implementation OBJECT REQUEST (Library will parse) RESPONSE (Library will respond with) Time delay 129 (response) 07 (limited qty) fine (qty = 1) Not defined Class 0 1 (read) 06 (no range, or all) data Class 1 1 (read) 06 (no range, or all)

  • Page 63: Section 4 Glossary

    Section 4 1MRS757823 A Glossary Section 4 Glossary Application function block library CROB Control relay output block Common time of occurrence. The time and date CTO object is an information object that represents the absolute time of day. DNP3 A distributed network protocol originally developed by Westronic.
  • Page 68 Contact us ABB Oy Medium Voltage Products, Distribution Automation P.O. Box 699 FI-65101 VAASA, Finland Phone +358 10 22 11 +358 10 22 41094 www.abb.com/substationautomation...

This manual is also suitable for:

Relion rer615

Table of Contents