ABB RELION 615 Series Modbus Point List Manual
  1. Manuals
  2. Brands
  3. ABB Manuals
  4. Control Unit
  5. Relion 615 series
  6. Modbus point list manual

ABB RELION 615 Series Modbus Point List Manual

Motor protection and control
Hide thumbs Also See for RELION 615 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
—
RELION® 615 SERIES
Motor Protection and Control
REM615 ANSI
Modbus Point List Manual

Advertisement

Table of Contents
loading

Related Manuals for ABB RELION 615 Series

Summary of Contents for ABB RELION 615 Series

  • Page 1 — RELION® 615 SERIES Motor Protection and Control REM615 ANSI Modbus Point List Manual...
  • Page 3 Document ID: 1MAC252756-MB Issued: 2019-06-07 Revision: B Product version: 5.0 FP1 © Copyright 2019 ABB. All rights reserved...
  • Page 4 Copyright This document and parts thereof must not be reproduced or copied without written permission from ABB, and the contents thereof must not be imparted to a third party, nor used for any unauthorized purpose. The software or hardware described in this document is furnished under a license and may be used, copied, or disclosed only in accordance with the terms of such license.
  • Page 5 ABB is not liable for any such damages and/or losses.
  • Page 6 (Low-voltage directive 2014/35/EU). This conformity is the result of tests conducted by ABB in accordance with the product standards EN 50263 and EN 60255-26 for the EMC directive, and with the product standards EN 60255-1 and EN 60255-27 for the low voltage directive.

  • Page 7: Table Of Contents

    Table of contents Table of contents Section 1 Introduction................9 This manual....................9 Intended audience..................9 Product documentation................10 Product documentation set..............10 Document revision history..............10 Related documentation..............11 Symbols and conventions...............11 Symbols.....................11 Document conventions..............11 Functions, codes and symbols............12 Section 2 Modbus data mappings............17 Overview....................17 Supported functions................17 Supported functions in REM615............17...
  • Page 8 Table of contents LD0.ARCSARC3 Arc protection (3) – AFD-3........26 LD0.CCBRBRF1 Circuit breaker failure protection (1) – 50BF-1..26 LD0.CCSPVC1 Current circuit supervision (1) – CCM-1....27 LD0.CMMXU1 Three-phase current measurement (1) – IA, IB, IC.....................27 LD0.DEFLPDEF1 Directional ground-fault protection, low stage (1) – 67/51N-1..............27 LD0.DOPPDPR1 Reverse power/directional overpower protection (1) –...
  • Page 9 Table of contents LD0.MAPGAPC4 Multipurpose protection (4) – MAP-4....37 LD0.MAPGAPC5 Multipurpose protection (5) – MAP-5....38 LD0.MAPGAPC6 Multipurpose protection (6) – MAP-6....38 LD0.MDSOPT1 Runtime counter for machines and devices (1) – OPTM-1................38 LD0.MNSPTOC1 Negative-sequence overcurrent protection for machines (1) – 46M-1..............39 LD0.MNSPTOC2 Negative-sequence overcurrent protection for machines (2) –...
  • Page 10 Table of contents LD0.SSCBR1 Circuit-breaker condition monitoring (1) – 52CM-1..................49 LD0.STTPMSU1 Motor start-up supervision (1) – 66/51LRS-1..50 LD0.TCSSCBR1 Trip circuit supervision (1) – TCM-1....50 LD0.TCSSCBR2 Trip circuit supervision (2) – TCM-2....50 LD0.TRPPTRC1 Master trip (1) – 86/94-1........51 LD0.TRPPTRC2 Master trip (2) – 86/94-2........51 LD0.VMMXU1 Three-phase voltage measurement (1) –...
  • Page 11 Table of contents LD0.SPCGAPC1 Generic control point (16 pcs) (1) – SPC-1..64 LD0.TRPPTRC3 Master trip (3) – 86/94-3........65 LD0.TRPPTRC4 Master trip (4) – 86/94-4........65 LD0.TRPPTRC5 Master trip (5) – 86/94-5........66 LD0.UL1TVTR1 Three-phase VT supervision (1)......66 LD0.XRGGIO130 Alarm/warning..........66 LD0.UDFCNT1 Multipurpose generic up-down counter (1) – CTR-1...................
  • Page 12 Table of contents SSR5 System status register (5) device alive register....83 SSR6 System status register (6) control command status (client-dependent).................84 System diagnostic values............. 84 Time and reason for latest protection relay reset......85 User-definable bits [Alt.2], visible on 0x,1x,3x and 4x....85 User-definable registers [Alt.1], visible on 3x and 4x....86 CTRL.CBCSWI1 Circuit breaker operation counter (1) ....
  • Page 13 Table of contents LD0.SCA4GAPC3 Analog value scaling (3) – SCA4-3....96 LD0.SCA4GAPC4 Analog value scaling (4) – SCA4-4....97 LD0.SPEMMTR1 Single-phase power and energy measurement (1)................97 LD0.SPEMMXU1 Single-phase power and energy measurement demand values (1) – SP, SE-1......98 LD0.SPEMMXU1 Single-phase power and energy measurement (1) –...

  • Page 15: Section 1 Introduction

    Section 1 1MAC252756-MB B Introduction Section 1 Introduction This manual The point list manual describes the outlook and properties of the data points specific to the protection relay. The manual should be used in conjunction with the corresponding communication protocol manual. Intended audience This manual addresses the communication system engineer or system integrator responsible for pre-engineering and engineering for communication setup in a substation...

  • Page 16: Product Documentation

    Product series- and product-specific manuals can be downloaded from the ABB Web site http://www.abb.com/relion. 1.3.2 Document revision history Document revision/date Product version History A/2018-02-26 5.0 FP1 First release B/2019-06-07 5.0 FP1 Content updated Download the latest documents from the ABB Web site http://www.abb.com/substationautomation. REM615 ANSI Point List Manual...

  • Page 17: Related Documentation

    Section 1 1MAC252756-MB B Introduction 1.3.3 Related documentation Name of the document Document ID Modbus Communication Protocol Manual 1MAC057386-MB Symbols and conventions 1.4.1 Symbols The caution icon indicates important information or warning related to the concept discussed in the text. It might indicate the presence of a hazard which could result in corruption of software or damage to equipment or property.

  • Page 18: Functions, Codes And Symbols

    Section 1 1MAC252756-MB B Introduction • Parameter names are shown in italics. The function can be enabled and disabled with the Operation setting. • Parameter values are indicated with quotation marks. The corresponding parameter values are "Enabled" and "Disabled". • Input/output messages and monitored data names are shown in Courier font.
  • Page 19 Section 1 1MAC252756-MB B Introduction Function IEC 61850 IEC 60617 ANSI/C37.2-2008 Overexcitation protection OEPVPH1 U/f> (1) 24-1 OEPVPH2 U/f> (2) 24-2 Negative-sequence overcurrent protection MNSPTOC1 I2>M (1) 46M-1 for machines MNSPTOC2 I2>M (2) 46M-2 Loss of load supervision LOFLPTUC1 3I< (1) 37M-1 LOFLPTUC2 3I<...
  • Page 20 Section 1 1MAC252756-MB B Introduction Function IEC 61850 IEC 60617 ANSI/C37.2-2008 Multipurpose protection MAPGAPC1 MAP (1) MAP-1 MAPGAPC2 MAP (2) MAP-2 MAPGAPC3 MAP (3) MAP-3 MAPGAPC4 MAP (4) MAP-4 MAPGAPC5 MAP (5) MAP-5 MAPGAPC6 MAP (6) MAP-6 MAPGAPC7 MAP (7) MAP-7 MAPGAPC8 MAP (8)
  • Page 21 Section 1 1MAC252756-MB B Introduction Function IEC 61850 IEC 60617 ANSI/C37.2-2008 Trip circuit supervision TCSSCBR1 TCS (1) TCM-1 TCSSCBR2 TCS (2) TCM-2 Current circuit supervision CCSPVC1 MCS 3I (1) Fuse failure supervision SEQSPVC1 FUSEF (1) Runtime counter for machines and devices MDSOPT1 OPTS (1) OPTM-1...
  • Page 22 Section 1 1MAC252756-MB B Introduction Function IEC 61850 IEC 60617 ANSI/C37.2-2008 Time delay on TONGAPC1 TON (1) 62TON-1 TONGAPC2 TON (2) 62TON-2 TONGAPC3 TON (3) 62TON-3 TONGAPC4 TON (4) 62TON-4 Set-reset SRGAPC1 SR (1) SR-1 SRGAPC2 SR (2) SR-2 SRGAPC3 SR (3) SR-3 SRGAPC4...

  • Page 23: Section 2 Modbus Data Mappings

    Section 2 1MAC252756-MB B Modbus data mappings Section 2 Modbus data mappings Overview This document describes the Modbus data points and structures available in the protection relay. The point lists describe a superset of all data available through the standard configuration/s including the optional functionalities.
  • Page 24 Section 2 1MAC252756-MB B Modbus data mappings Function IEC 61850 ANSI MA01 MA02 MA04 MA05 Positive-sequence PSPTUV 27PS undervoltage protection Negative-sequence NSPTOV overvoltage protection Three-phase remnant MSVPR undervoltage protection (source 1) Frequency protection FRPFRQ Overexcitation protection OEPVPH Negative-sequence MNSPTOC overcurrent protection for machines Loss of load supervision LOFLPTUC...
  • Page 25 Section 2 1MAC252756-MB B Modbus data mappings Function IEC 61850 ANSI MA01 MA02 MA04 MA05 Emergency start-up ESMGAPC 62EST Condition monitoring Circuit-breaker condition SSCBR 52CM monitoring Trip circuit supervision TCSSCBR Current circuit supervision CCSPVC Fuse failure supervision SEQSPVC Runtime counter for MDSOPT OPTM machines and devices...

  • Page 26: Indications

    Section 2 1MAC252756-MB B Modbus data mappings Function IEC 61850 ANSI MA01 MA02 MA04 MA05 Time delay off (8 pcs) TOFGAPC 62TOF Time delay on (8 pcs) TONGAPC 62TON Set-reset (8 pcs) SRGAPC Move (8 pcs) MVGAPC Generic control point (16 pcs) SPCGAPC Analog value scaling SCA4GAPC...

  • Page 27: Premapped Indications

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1 Premapped indications 2.3.1.1 Common data 1 Table 4: Common data 1 BitA RegA IEC 61850 name SA name Description Values CTRL.LLN0 2720 170.00 .Loc.stVal Remote/Local state 0/1=Rem/Loc 2721 170.01 .LocKeyHMI.stVal.Station Station state 1=Station DR.RDRE1 2722...

  • Page 28: Ctrl.cbcswi1 Circuit Breaker (1) Mom+Mcd Position

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.4 CTRL.CBCSWI1 Circuit breaker (1) mom+mcd position Table 7: CTRL.CBCSWI1 Circuit breaker (1) mom+mcd position BitA RegA IEC 61850 name SA name Description Values CTRL.CBCSWI1 POSITION 2816 176.00 .Pos.stVal.Close Close bit 1=Close 2817 176.01 .mcd 2818...

  • Page 29: Ctrl.dcsxswi2 Disconnector Position Indication (2) - 29Ds-1

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.7 CTRL.DCSXSWI2 Disconnector position indication (2) – 29DS-1 Table 10: CTRL.DCSXSWI2 Disconnector position indication (2) – 29DS-1 BitA RegA IEC 61850 name SA name Description Values CTRL.DCSXSWI2 POSITION 2795 174.11 .Pos.stVal.Close Close bit 1=Close 2796 174.12...

  • Page 30: Ctrl.dcxswi2 Disconnector Control (2) - 29Ds-2

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.10 CTRL.DCXSWI2 Disconnector control (2) – 29DS-2 Table 13: CTRL.DCXSWI2 Disconnector control (2) – 29DS-2 BitA RegA IEC 61850 name SA name Description Values CTRL.DCXSWI2 POSITION 3484 217.12 .Pos.stVal.Close Close bit 1=Close 3485 217.13 .Pos.stVal.Open Open bit...

  • Page 31: Ctrl.esxswi1 Grounding Switch Control (1) - 29Gs-1

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.13 CTRL.ESXSWI1 Grounding switch control (1) – 29GS-1 Table 16: CTRL.ESXSWI1 Grounding switch control (1) – 29GS-1 BitA RegA IEC 61850 name SA name Description Values CTRL.ESXSWI1 POSITION 3496 218.08 .Pos.stVal.Close Close bit 1=Close 3497 218.09...

  • Page 32: Ld0.Arcsarc2 Arc Protection (2) - Afd-2

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.15 LD0.ARCSARC2 Arc protection (2) – AFD-2 Table 18: LD0.ARCSARC2 Arc protection (2) – AFD-2 BitA RegA IEC 61850 name SA name Description Values LD0.ARCSARC21 2984 186.08 .FADet.stVal ARC_FLT_DET Arc detected 1=Detected 2985 186.09 .mcd LD0.ARCPTRC21...

  • Page 33: Ld0.Ccspvc1 Current Circuit Supervision (1) - Ccm-1

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.18 LD0.CCSPVC1 Current circuit supervision (1) – CCM-1 Table 21: LD0.CCSPVC1 Current circuit supervision (1) – CCM-1 BitA RegA IEC 61850 name SA name Description Values LD0.CCSPVC1 2936 183.08 .SigFailAlm.stVal ALARM Alarm 1=Alarm 2937 183.09 .mcd...

  • Page 34: Ld0.Doppdpr1 Reverse Power/Directional Overpower Protection (1) - 32O-1

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.21 LD0.DOPPDPR1 Reverse power/directional overpower protection (1) – 32O-1 Table 24: LD0.DOPPDPR1 Reverse power/directional overpower protection (1) – 32O-1 BitA RegA IEC 61850 name SA name Description Values LD0.DOPPDPR1 4076 254.12 .Str.general PICKUP Stage pickup 1=Pickup 4077...

  • Page 35: Ld0.Duppdpr1 Underpower Protection (1) - 32U-1

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.24 LD0.DUPPDPR1 Underpower protection (1) – 32U-1 Table 27: LD0.DUPPDPR1 Underpower protection (1) – 32U-1 BitA RegA IEC 61850 name SA name Description Values LD0.DUPPDPR1 4068 254,.4 .Str.general PICKUP Stage pickup 1=Pickup 4069 254.5 .mcd 4070...

  • Page 36: Ld0.Efhptoc2 Non-Directional Ground-Fault Protection, High Stage (2) - 50G-2

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.27 LD0.EFHPTOC2 Non-directional ground-fault protection, high stage (2) – 50G-2 Table 30: LD0.EFHPTOC2 Non-directional ground-fault protection, high stage (2) – 50G-2 BitA RegA IEC 61850 name SA name Description Values LD0.EFIPTOC2 4010 250.1 .Str.general PICKUP Stage pickup...

  • Page 37: Ld0.Frpfrq2 Frequency Protection (2) - 81-2

    Section 2 1MAC252756-MB B Modbus data mappings BitA RegA IEC 61850 name SA name Description Values LD0.FRPTOF1 Overfrequency 3026 189.02 .Op.general OPR_OFRQ Trip 1=Trip 3027 189.03 .mcd LD0.FRPTUF1 Underfrequency 3028 189.04 .Op.general OPR_UFRQ Trip 1=Trip 3029 189.05 .mcd LD0.FRPFRC1 Frequency gradient 3030 189.06 .Op.general...

  • Page 38: Ld0.Hibpdif1 High-Impedance Differential Protection For Phase B (1) - 87B-1

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.33 LD0.HIBPDIF1 High-impedance differential protection for phase B (1) – 87B-1 Table 36: LD0.HIBPDIF1 High-impedance differential protection for phase B (1) – 87B-1 BitA RegA IEC 61850 name SA name Description Values LD0.HIAPDIF1 4058 253.1 .Str.general...

  • Page 39: Ld0.Ledggio1 Indication Led States Color1/Color2 - Led

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.37 LD0.LEDGGIO1 Indication LED states Color1/Color2 – LED These LED indication points interpret the case when a signal is wired to both the OK and ALARM inputs, but inverted to the other. This means that the LED toggles between red and green colors.

  • Page 40: Ld0.Ledggio1 Indication Led States Off/Colorx - Led

    Section 2 1MAC252756-MB B Modbus data mappings BitA RegA IEC 61850 name SA name Description Values 3526 220.06 .LEDSt7.stVal LED 7 state 0/1=Color1/2 3527 220.07 .LEDSt8.stVal LED 8 state 0/1=Color1/2 3528 220.08 .LEDSt9.stVal LED 9 state 0/1=Color1/2 3529 220.09 .LEDSt10.stVal LED 10 state 0/1=Color1/2 3530...

  • Page 41: Ld0.Ledptrc1 Global Conditioning (1)

    Section 2 1MAC252756-MB B Modbus data mappings BitA RegA IEC 61850 name SA name Description Values 2774 173.06 .LEDSt7.stVal LED 7 state 0/1=Off/Color 2775 173.07 .LEDSt8.stVal LED 8 state 0/1=Off/Color 2776 173.08 .LEDSt9.stVal LED 9 state 0/1=Off/Color 2777 173.09 .LEDSt10.stVal LED 10 state 0/1=Off/Color 2778...

  • Page 42: Ld0.Loflptuc1 Loss Of Load Supervision (1) - 37M-1

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.41 LD0.LOFLPTUC1 Loss of load supervision (1) – 37M-1 Table 44: LD0.LOFLPTUC1 Loss of load supervision (1) – 37M-1 BitA RegA IEC 61850 name SA name Description Values LD0.LOFLPTUC1 2912 182.00 .Str.general PICKUP Stage pickup 1=Pickup 2913...

  • Page 43: Ld0.Mapgapc2 Multipurpose Protection (2) - Map-2

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.44 LD0.MAPGAPC2 Multipurpose protection (2) – MAP-2 Table 47: LD0.MAPGAPC2 Multipurpose protection (2) – MAP-2 BitA RegA IEC 61850 name SA name Description Values LD0.MAPGAPC2 3060 191.04 .Op.general TRIP Stage trip 1 = Trip 3061 191.05 .mcd...

  • Page 44: Ld0.Mapgapc5 Multipurpose Protection (5) - Map-5

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.47 LD0.MAPGAPC5 Multipurpose protection (5) – MAP-5 Table 50: LD0.MAPGAPC5 Multipurpose protection (5) – MAP-5 BitA RegA IEC 61850 name SA name Description Values LD0.MAPGAPC5 3040 190.00 .Op.general TRIP Stage trip 1 = Trip 3041 190.01 .mcd...

  • Page 45: Ld0.Mnsptoc1 Negative-Sequence Overcurrent Protection For Machines (1) - 46M-1

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.50 LD0.MNSPTOC1 Negative-sequence overcurrent protection for machines (1) – 46M-1 Table 53: LD0.MNSPTOC1 Negative-sequence overcurrent protection for machines (1) – 46M-1 BitA RegA IEC 61850 name SA name Description Values LD0.MNSPTOC1 2904 181.08 .Str.general PICKUP Stage pickup...

  • Page 46: Ld0.Mvgapc1 Move (8 Pcs) (1) - Mv-1

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.53 LD0.MVGAPC1 Move (8 pcs) (1) – MV-1 Table 56: LD0.MVGAPC1 Move (8 pcs) (1) – MV-1 BitA RegA IEC 61850 name SA name Description Values LD0.MVGAPC1 3536 221.00 .SPCSO1.stVal Input 1 0/1=Off/On 3537 221.01 .mcd...

  • Page 47: Ld0.Nsptov1 Negative-Sequence Overvoltage Protection (1) - 47-1

    Section 2 1MAC252756-MB B Modbus data mappings BitA RegA IEC 61850 name SA name Description Values 3562 222.10 .SPCSO6.stVal Input 6 0/1=Off/On 3563 222.11 .mcd 3564 222.12 .SPCSO7.stVal Input 7 0/1=Off/On 3565 222.13 .mcd 3566 222.14 .SPCSO8.stVal Input 8 0/1=Off/On 3567 222.15 .mcd...

  • Page 48: Ld0.Oepvph1 Overexcitation Protection (1) - 24-1

    Section 2 1MAC252756-MB B Modbus data mappings BitA RegA IEC 61850 name SA name Description Values .mcd 4036 252.4 .Op.general TRIP General trip 1=Trip 4037 252.5 .mcd 2.3.1.57 LD0.OEPVPH1 Overexcitation protection (1) – 24-1 Table 60: LD0.OEPVPH1 Overexcitation protection (1) – 24-1 BitA RegA IEC 61850 name...

  • Page 49: Ld0.Phhptoc2 Three-Phase Non-Directional Overcurrent Protection, High Stage (2) - 50P-2

    Section 2 1MAC252756-MB B Modbus data mappings BitA RegA IEC 61850 name SA name Description Values .Str.phsC phsC pickup 1=Pickup .mcd 4004 250.4 .Op.general TRIP General trip 1=Trip 4005 250.5 .mcd 2.3.1.60 LD0.PHHPTOC2 Three-phase non-directional overcurrent protection, high stage (2) – 50P-2 Table 63: LD0.PHHPTOC2 Three-phase non-directional overcurrent protection, high stage (2) –...

  • Page 50: Ld0.Phlptoc1 Three-Phase Non-Directional Overcurrent Protection, Low Stage (1) - 51P-1

    Section 2 1MAC252756-MB B Modbus data mappings BitA RegA IEC 61850 name SA name Description Values 2897 181.01 .mcd 2898 181.02 .Op.general TRIP General trip 1=Trip 2899 181.03 .mcd 2.3.1.62 LD0.PHLPTOC1 Three-phase non-directional overcurrent protection, low stage (1) – 51P-1 Table 65: LD0.PHLPTOC1 Three-phase non-directional overcurrent protection, low stage (1) –...

  • Page 51: Ld0.Phptov2 Three-Phase Overvoltage Protection (2) - 59-2

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.64 LD0.PHPTOV2 Three-phase overvoltage protection (2) – 59-2 Table 67: LD0. PHPTOV2 hree-phase overvoltage protection (2) – 59-2 BitA RegA IEC 61850 name SA name Description Values LD0. PHPTOV2 4030 251.14 .Str.general PICKUP General pickup 1=Pickup 4031...

  • Page 52: Ld0.Phptuv2 Three-Phase Undervoltage Protection (2)

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.66 LD0.PHPTUV2 Three-phase undervoltage protection (2) – 27-2 Table 69: LD0.PHPTUV2 Three-phase undervoltage protection (2) – 27-2 BitA RegA IEC 61850 name SA name Description Values LD0.PHPTUV2 4022 251.6 .Str.general PICKUP General pickup 1=Pickup 4023 251.7...

  • Page 53: Ld0.Rescmmxu1 Residual Current Measurement (1) - Ig-1

    Section 2 1MAC252756-MB B Modbus data mappings BitA RegA IEC 61850 name SA name Description Values 2954 184.10 .Str.phsC phsC pickup 1=Pickup 2955 184.11 .mcd 2956 184.12 .Op.general TRIP General trip 1=Trip 2957 184.13 .mcd 2.3.1.69 LD0.RESCMMXU1 Residual current measurement (1) – IG-1 Table 72: LD0.RESCMMXU1 Residual current measurement (1) –...

  • Page 54: Ld0.Rovptov2 Residual Overvoltage Protection (2) - 59N-1

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.72 LD0.ROVPTOV2 Residual overvoltage protection (2) – 59N-1 Table 75: LD0.ROVPTOV1 Residual overvoltage protection (1) – 59N-1 BitA RegA IEC 61850 name SA name Description Values LD0.ROVPTOV1 4014 250.14 .Str.general PICKUP General pickup 1=Pickup 4015 250.15...

  • Page 55: Ld0.Sscbr1 Circuit-Breaker Condition Monitoring (1) - 52Cm-1

    Section 2 1MAC252756-MB B Modbus data mappings BitA RegA IEC 61850 name SA name Description Values 3644 227.12 .SPCS07.stVal Ouput state 7 0/1=Off/On 3645 227.13 .mcd 3646 227.14 .SPCS08.stVal Ouput state 8 0/1=Off/On 3647 227.15 .mcd 3648 228.00 .SPCS09.stVal Ouput state 9 0/1=Off/On 3649 228.01...

  • Page 56: Ld0.Sttpmsu1 Motor Start-Up Supervision (1) - 66/51Lrs-1

    Section 2 1MAC252756-MB B Modbus data mappings BitA RegA IEC 61850 name SA name Description Values 2855 178.07 .InsBlk.stVal PRES_LO Low pressure lockout 1=Lockout LD0.SSCBR1 2856 178.08 .APwrAlm.stVal IPOW_ALM Lyt alarm 1=Alarm 2857 178.09 .APwrLO.stVal IPOW_LO Lyt lockout 1=Lockout 2858 178.10 .RmnNumOpAlm.stVal CB_LIFE_ALM...

  • Page 57: Ld0.Trpptrc1 Master Trip (1) - 86/94-1

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.79 LD0.TRPPTRC1 Master trip (1) – 86/94-1 Table 82: LD0.TRPPTRC1 Master trip (1) – 86/94-1 BitA RegA IEC 61850 name SA name Description Values LD0.TRPPTRC1 2740 171.04 .Op.general Op. input signal 1=Operate 2741 171.05 .mcd 2742...

  • Page 58: Ld0.Xaggio130 Physical I/O States (Aim Card Xa130)

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.82 LD0.XAGGIO130 Physical I/O states (AIM card XA130) Table 85: LD0.XAGGIO130 Physical I/O states (AIM card XA130) BitA RegA IEC 61850 name SA name Description Values LD0.XAGGIO130 3280 205.00 .Ind1.stVal XA130-Input 1 State 0/1=Off/On 3281 205.01...

  • Page 59: Ld0.Xggio100 Physical I/O States (Psm Card X100)

    Section 2 1MAC252756-MB B Modbus data mappings BitA RegA IEC 61850 name SA name Description Values .mom-only Mom only alternative 3226 201.10 .Ind6.stVal X110-Input 6 State 0/1=Off/On 3227 201.11 .mcd .mom-only Mom only alternative 3228 201.12 .Ind7.stVal X110-Input 7 State 0/1=Off/On 3229 201.13...

  • Page 60: Ld0.Xggio110 Physical I/O States (Bio Card X110)

    Section 2 1MAC252756-MB B Modbus data mappings BitA RegA IEC 61850 name SA name Description Values .mom-only Mom only alternative 3256 203.08 .SPCSO5.stVal X100-Output 5 State 0/1=Off/On 3257 203.09 .mcd .mom-only Mom only alternative 3258 203.10 .SPCSO6.stVal X100-Output 6 State 0/1=Off/On 3259 203.11...

  • Page 61: Ld0.Xggio120 Physical I/O States (Aim Card X120)

    Section 2 1MAC252756-MB B Modbus data mappings BitA RegA IEC 61850 name SA name Description Values .mom-only Mom only alternative 3232 202.00 .SPCSO1.stVal X110-Output 1 State 0/1=Off/On 3233 202.01 .mcd .mom-only Mom only alternative 3234 202.02 .SPCSO2.stVal X110-Output 2 State 0/1=Off/On 3235 202.03...

  • Page 62: Ld0.Xggio130 Physical I/O States (Bio Card X130)

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.87 LD0.XGGIO130 Physical I/O states (BIO card X130) Table 90: LD0.XGGIO130 Physical I/O states (BIO card X130) BitA RegA IEC 61850 name SA name Description Values LD0.XGGIO130 3184 199.00 .Ind1.stVal X130-Input 1 State 0/1=Off/On 3185 199.01...

  • Page 63: Ld0.Xrggio130 Alarm/Warning

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.1.88 LD0.XRGGIO130 Alarm/warning Table 91: LD0.XRGGIO130 Alarm/warning BitA RegA IEC 61850 name SA name Description Values LD0.XRGGIO130 3072 192.00 .Alm.stVal XRGGIO130 Alarm 1=Alarm 3073 192.01 .mcd 3074 192.02 .Wrn.stVal XRGGIO130 Warning 1=Warning 3075 192.03 .mcd 2.3.2...

  • Page 64: Ld0.Diaglcch1 Ethernet Supervision (1)

    Section 2 1MAC252756-MB B Modbus data mappings BitA RegA IEC 61850 name SA name Description Values .mcd .ChgFlg.stVal Configuration changed 1=Changed .mcd .FacSet.stVal Factory settings in use 1=In use .mcd LD0.GNRLLTMS1 .TmChSt1.stVal Time synch. status 0/1=Down/Up .mcd LD0.SCHLCCH1 .ChLiv.stVal CH1LIV Ethernet channel 1 live 1=Live .mcd...

  • Page 65: Ld0.Ldprlrc1 Load Profile Record (1) - Loadprof

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.2.5 LD0.LDPRLRC1 Load profile record (1) – LoadProf Table 96: LD0.LDPRLRC1 Load profile record (1) – LoadProf BitA RegA IEC 61850 name SA name Description Value LD0.LDPRLRC1 .MemWrn.stVal Recording memory warning 1=Warning .mcd .MemAlm.stVal Recording memory alarm 1=Alarm...

  • Page 66: Ld0.Mapgapc9 Multipurpose Protection (9) - Map-9

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.2.8 LD0.MAPGAPC9 Multipurpose protection (9) – MAP-9 Table 99: LD0.MAPGAPC9 Multipurpose protection (9) – MAP-9 BitA RegA IEC 61850 name SA name Description Values LD0.MAPGAPC9 .Str.general PICKUP Stage pickup 1 = Pickup .mcd .Op.general TRIP Stage trip...

  • Page 67: Ld0.Mapgapc12 Multipurpose Protection (12) - Map-12

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.2.11 LD0.MAPGAPC12 Multipurpose protection (12) – MAP-12 Table 102: LD0.MAPGAPC12 Multipurpose protection (12) – MAP-12 BitA RegA IEC 61850 name SA name Description Values LD0.MAPGAPC12 .Str.general PICKUP Stage pickup 1 = Pickup .mcd .Op.general TRIP Stage trip...

  • Page 68: Ld0.Mapgapc15 Multipurpose Protection (15) - Map-15

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.2.14 LD0.MAPGAPC15 Multipurpose protection (15) – MAP-15 Table 105: LD0.MAPGAPC15 Multipurpose protection (15) – MAP-15 BitA RegA IEC 61850 name SA name Description Values LD0.MAPGAPC15 .Str.general PICKUP Stage pickup 1 = Pickup .mcd .Op.general TRIP Stage trip...

  • Page 69: Ld0.Mapgapc18 Multipurpose Protection (18) - Map-18

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.2.17 LD0.MAPGAPC18 Multipurpose protection (18) – MAP-18 Table 108: LD0.MAPGAPC18 Multipurpose protection (18) – MAP-18 BitA RegA IEC 61850 name SA name Description Values LD0.MAPGAPC18 .Str.general PICKUP Stage pickup 1 = Pickup .mcd .Op.general TRIP Stage trip...

  • Page 70: Ld0.Restvtr1 Vg Vt Supervision (1)

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.2.21 LD0.RESTVTR1 VG VT supervision (1) Table 112: LD0.RESTVTR1 VG VT supervision (1) BitA RegA IEC 61850 name SA name Description Values LD0.RESTVTR1 .Alm.stVal ALARM Alarm 1=Alarm .mcd .Wrn.stVal WARNING Warning 1=Warning .mcd 2.3.2.22 LD0.SPCGAPC1 Generic control point (16 pcs) (1) –...

  • Page 71: Ld0.Trpptrc3 Master Trip (3) - 86/94-3

    Section 2 1MAC252756-MB B Modbus data mappings BitA RegA IEC 61850 name SA name Description Values .SPCSO12.stVal Ouput state 12 0/1=Off/On .mcd .SPCSO13.stVal Ouput state 13 0/1=Off/On .mcd .SPCSO14.stVal Ouput state 14 0/1=Off/On .mcd .SPCSO15.stVal Ouput state 15 0/1=Off/On .mcd .SPCSO16.stVal Ouput state 16 0/1=Off/On...

  • Page 72: Ld0.Trpptrc5 Master Trip (5) - 86/94-5

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.2.25 LD0.TRPPTRC5 Master trip (5) – 86/94-5 Table 116: LD0.TRPPTRC5 Master trip (5) – 86/94-5 BitA RegA IEC 61850 name SA name Description Values LD0.TRPPTRC5 .Op.general Op. input signal 1 = Operate .mcd .Tr.general Trip output signal 1 = Trip...

  • Page 73: Ld0.Udfcnt1 Multipurpose Generic Up-Down Counter (1) - Ctr-1

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.2.28 LD0.UDFCNT1 Multipurpose generic up-down counter (1) – CTR-1 Table 119: LD0.UDFCNT1 Multipurpose generic up-down counter (1) – CTR-1 BitA RegA IEC 61850 name SA name Description Values LD0. UDFCNT1 .DnCntSt.stVal DNCNT_STS Status of the down counting 1= down counting .mcd UpCntSt.stVal...

  • Page 74: Ld0.Udfcnt4 Multipurpose Generic Up-Down Counter (4) - Ctr-4

    Section 2 1MAC252756-MB B Modbus data mappings 2.3.2.31 LD0.UDFCNT4 Multipurpose generic up-down counter (4) – CTR-4 Table 122: LD0.UDFCNT4 Multipurpose generic up-down counter (4) – CTR-4 BitA RegA IEC 61850 name SA name Description Values LD0. UDFCNT4 .DnCntSt.stVal DNCNT_STS Status of the down counting 1= down counting .mcd UpCntSt.stVal...

  • Page 75: Control Structure 1

    Section 2 1MAC252756-MB B Modbus data mappings 2.4.1.2 Control structure 1 Table 125: Control structure 1 RegA Type Scale IEC 61850 name SA name Description Values 8001 Execute register 8002 Password reg 1 acc to setting 8003 Password reg 2 acc to setting 8004 Control register...

  • Page 76: Control Structure 4

    Section 2 1MAC252756-MB B Modbus data mappings 2.4.1.5 Control structure 4 Table 128: Control structure 4 RegA Type Scale IEC 61850 name SA name Description Values 8016 Execute register 8017 Password reg 1 acc to setting 8018 Password reg 2 acc to setting 8019 Control register...

  • Page 77: Control Structure 7

    Section 2 1MAC252756-MB B Modbus data mappings 2.4.1.8 Control structure 7 Table 131: Control structure 7 RegA Type Scale IEC 61850 name SA name Description Values 8031 Execute register 8032 Password reg 1 acc to setting 8033 Password reg 2 acc to setting 8034 Control register...
  • Page 78 Section 2 1MAC252756-MB B Modbus data mappings RegA Type Scale IEC 61850 name SA name Description Values Record 1 data to read: 9252 - Record sequence num 1...9999 9253 - Unread records left 0...499 Timestamp of record 9254 - Year, Month Year/Month 9255 - Day, Hour...
  • Page 79 Section 2 1MAC252756-MB B Modbus data mappings RegA Type Scale IEC 61850 name SA name Description Values 9279 - Millisecond Millisecond 9280 Event identification 9281 Data object ID1 9282 Data object ID2 9283 Event data value 1 9284 Event data value 2 Record 4 data to read: If selected 9285...
  • Page 80 Section 2 1MAC252756-MB B Modbus data mappings RegA Type Scale IEC 61850 name SA name Description Values Record 6 data to read: If selected 9307 - Record sequence num 1...9999 9308 - Unread records left 0...499 Timestamp of record 9309 - Year, Month Year/Month 9310...
  • Page 81 Section 2 1MAC252756-MB B Modbus data mappings RegA Type Scale IEC 61850 name SA name Description Values 9334 - Millisecond Millisecond 9335 Event identification 9336 Data object ID1 9337 Data object ID2 9338 Event data value 1 9339 Event data value 2 Record 9 data to read: If selected 9340...

  • Page 82: Fault Record Structure Header

    Section 2 1MAC252756-MB B Modbus data mappings 2.4.1.12 Fault record structure header Table 135: Fault record structure header RegA Type Scale IEC 61850 name SA name Description Values Selection write 9401 Read selection -99…3 Record data header 9402 Record sequence num 0...65535 9403 Unread records left...
  • Page 83 Section 2 1MAC252756-MB B Modbus data mappings RegA Type Scale IEC 61850 name SA name Description Values 9418 .FltDiskm.mag Fault distance 0.00… 9999.99 pu 9419 (Low word) 9420 .ActSetGr.stVal Active setting group 1…6 9421 .ShotPntr.stVal AR shot pointer value 0...7 Captured values during fault 9422 1000...
  • Page 84 Section 2 1MAC252756-MB B Modbus data mappings RegA Type Scale IEC 61850 name SA name Description Values 9441 1000 .APhsB1.mag Current phs B(1) 0.000… 50.000 [×In] 9442 1000 .APhsC1.mag Current phs C(1) 0.000… 50.000 [×In] 9443 1000 .ARes1.mag Current Io(1) 0.000…...
  • Page 85 Section 2 1MAC252756-MB B Modbus data mappings RegA Type Scale IEC 61850 name SA name Description Values 9464 .PPLoopReact.mag Fault loop reactance -1000.00...10 00.00 [ohm] 9465 (Low word) 9466 1000 .CBClrTm.mag Breaker clear time 0.000...3.000 9467 1000 .APhsA2.mag Current phs A(2) 0.000…...

  • Page 86: Protection Relay's Real-Time Clock (In Local Time Mode) - Read And Write (Synchronize)

    Section 2 1MAC252756-MB B Modbus data mappings RegA Type Scale IEC 61850 name SA name Description Values 9487 .DifACAngVAB1.mag Angle UAB-IC(1) -180.00… 180.00 [deg] 9488 .DifANAngVN2.mag. Angle Uo-Io(2) -180.00… 180.00 [deg] 9489 .DifAAAngVBC2.mag. Angle UBC-IA(2) -180.00… 180.00 [deg] 9490 .DifABAngVCA2.mag Angle UCA-IB(2) -180.00…...

  • Page 87: Indication Bits Mirrored In Registers

    Section 2 1MAC252756-MB B Modbus data mappings RegA Type Scale IEC 61850 name SA name Description Values 9216 Minute 0...59 9217 Second 0...59 9218 Millisecond 0…999 1) See the technical manual. 2.4.1.16 Indication bits mirrored in registers Table 139: Indication bits mirrored in registers RegA Type Scale...

  • Page 88: Ssr2 System Status Register (2) Protection Relay's Mode And State

    Section 2 1MAC252756-MB B Modbus data mappings 2.4.1.18 SSR2 System status register (2) protection relay's mode and state Table 141: SSR2 System status register (2) protection relay's mode and state RegA Type Scale IEC 61850 name SA name Description Values 129.00 Device test mode 1=Test mode...

  • Page 89: Ssr4 System Status Register (4) Data Available 2 (Client-Dependent, User

    Section 2 1MAC252756-MB B Modbus data mappings RegA Type Scale IEC 61850 name SA name Description Values 130.11 < reserved > 130.12 < reserved > 130.13 < reserved > 130.14 < reserved > 130.15 < reserved > 2.4.1.20 SSR4 System status register (4) data available 2 (client-dependent, user- definable) Table 143: SSR4 System status register (4) data available 2 (client-dependent, user-definable)

  • Page 90: Ssr6 System Status Register (6) Control Command Status (Client- Dependent)

    Section 2 1MAC252756-MB B Modbus data mappings 2.4.1.22 SSR6 System status register (6) control command status (client- dependent) Table 145: SSR6 System status register (6) control command status (client-dependent) RegA Type Scale IEC 61850 name SA name Description Values Last cmd result code 133.00 - bit 0 133.01...

  • Page 91: Time And Reason For Latest Protection Relay Reset

    Section 2 1MAC252756-MB B Modbus data mappings RegA Type Scale IEC 61850 name SA name Description Values LD0.LPHD1 2054 .NumPwrUp.stVal Num. of cold starts 0...65535 2055 .WrmStr.stVal Num. of warm starts 0...65535 2056 .WacTrg.stVal Num. of watchdog resets 0...65535 LD0.LDEV1 2057 .ChgAckCnt.stVal Num.

  • Page 92: User-Definable Registers [Alt.1], Visible On 3X And 4X

    Section 2 1MAC252756-MB B Modbus data mappings BitA Type Scale IEC 61850 name SA name Description Values Usr reg 1.Bit 15 Usr reg 2.Bit 00 Usr reg 2.Bit 01 2046 Usr reg 127.Bit 14 2047 Usr reg 127.Bit 15 2.4.1.26 User-definable registers [Alt.1], visible on 3x and 4x Table 149: User-definable registers [Alt.1], visible on 3x and 4x...

  • Page 93: Ld0.Cmmxu1 Phase Current Demand Values (1) - Ia, Ib, Ic

    Section 2 1MAC252756-MB B Modbus data mappings 2.4.1.29 LD0.CMMXU1 Phase current demand values (1) – IA, IB, IC Table 152: LD0.CMMXU1 Phase current demand values (1) – IA, IB, IC RegA Type Scale IEC 61850 name SA name Description Values LD0.CAVMMXU1 Demand value 2001...

  • Page 94: Ld0.Cmmxu1 Three-Phase Current Measurement (1) - Ia, Ib, Ic

    Section 2 1MAC252756-MB B Modbus data mappings RegA Type Scale IEC 61850 name SA name Description Values 1000 .A.phsA.cVal.mag Max demand IL1 Phs A amplitude 0.00…50.0 [xIn] 1000 .A.phsB.cVal.mag Max demand IL2 Phs B amplitude 0.00…50.0 [xIn] 1000 .A.phsC.cVal.mag Max demand IL3 Phs C amplitude 0.00…50.0 [xIn]...

  • Page 95: Ld0.Mdsopt1 Runtime Counter For Machines And Devices (1) - Optm-1

    Section 2 1MAC252756-MB B Modbus data mappings 2.4.1.33 LD0.MDSOPT1 Runtime counter for machines and devices (1) – OPTM-1 Since the register size is 16 bits, the value saturates at 65535 hours (approximately 7.5 years). Alternatively, a 32-bit user-definable register can be made of this data to cover the whole 300 000 hours (34 years) range.

  • Page 96: Ld0.Pemmxu1 Power Measurement Demand Values (1) - P

    Section 2 1MAC252756-MB B Modbus data mappings 2.4.1.36 LD0.PEMMXU1 Power measurement demand values (1) – P, E-1 Table 159: LD0.PEMMXU1 Power measurement demand values (1) – P, E-1 RegA Type Scale IEC 61850 name SA name Description Values LD0.PEAVMMXU1 Demand value 1939 .TotW.mag Active power P (high)

  • Page 97: Ld0.Rescmmxu1 Residual Current Demand Value (1) - Ig-1

    Section 2 1MAC252756-MB B Modbus data mappings 2.4.1.38 LD0.RESCMMXU1 Residual current demand value (1) – IG-1 Table 161: LD0.RESCMMXU1 Residual current demand value (1) – IG-1 RegA Type Scale IEC 61850 name SA name Description Values LD0.RCAVMMXU1 Demand value 1989 1000 .A.res.cVal.mag I_DMD_RES...

  • Page 98: Ld0.Resvmmxu1 Residual Voltage Demand Value (1

    Section 2 1MAC252756-MB B Modbus data mappings 2.4.1.40 LD0.RESVMMXU1 Residual voltage demand value (1) – VG-1 Table 163: LD0.RESVMMXU1 Residual voltage demand value (1) – VG-1 RegA Type Scale IEC 61850 name SA name Description Values LD0.RVAVMMXU1 Demand value 1977 1000 .PhV.res.cVal.mag U_DMD_RES...

  • Page 99: Ld0.Vmmxu1 Three-Phase Voltage Measurement (1) - Va, Vb, Vc

    Section 2 1MAC252756-MB B Modbus data mappings RegA Type Scale IEC 61850 name SA name Description Values 2062 .OpTmCls.mag T_TRV_CL Close travel time 0...60000 [ms] LD0.SSOPM1 0.00…99.99 2063 .TmsSprCha.mag T_SPR_CHR Spring charge time LD0.SPH1SCBR1 2064 .RmnNumOp.stVal CB_LIFE_A Remain.life phs A -/+ 9999 LD0.SPH2SCBR1 2065...

  • Page 100: Ld0.Vmmxu1 Voltage Demand Values (1) - Va, Vb, Vc

    Section 2 1MAC252756-MB B Modbus data mappings 2.4.1.44 LD0.VMMXU1 Voltage demand values (1) – VA, VB, VC Table 167: LD0.VMMXU1 Voltage demand values (1) – VA, VB, VC RegA Type Scale IEC 61850 name SA name Description Values LD0.VAVMMXU1 Demand value 1954 1000 .PhV.phsA.cVal.mag...

  • Page 101: Unmapped Registers

    Section 2 1MAC252756-MB B Modbus data mappings RegA Type Scale IEC 61580 name SA name Description Values 2036 .AnIn6.mag AI_VAL6 RTD input 6 in ohms -/+ 10000.00 2037 .AnIn7.mag AI_VAL7 RTD input 7 in ohms -/+ 10000.00 2038 .AnIn8.mag AI_VAL8 RTD input 8 in ohms -/+ 10000.00 2.4.2...

  • Page 102: Ld0.Sca4Gapc1 Analog Value Scaling (1) - Sca4-1

    Section 2 1MAC252756-MB B Modbus data mappings RegA Type Scale IEC 61850 name SA name Description Values - Low word .ISCS03.stVal OUT3 - Integer value 3 (high) +2147483647 - Low word .ISCS04.stVal OUT4 - Integer value 4 (high) +2147483647 - Low word 2.4.2.4 LD0.SCA4GAPC1 Analog value scaling (1) –...

  • Page 103: Ld0.Sca4Gapc4 Analog Value Scaling (4) - Sca4-4

    Section 2 1MAC252756-MB B Modbus data mappings 2.4.2.7 LD0.SCA4GAPC4 Analog value scaling (4) – SCA4-4 Table 176: LD0.SCA4GAPC4 Analog value scaling (4) – SCA4-4 RegA Type Scale IEC 61850 name SA name Description Values LD0.SCA4GAPC4 1000 .AnValOut1.mag AO1_VALUE Analog value 1 after scaling 0…N 1000 .AnValOut2.mag...

  • Page 104: Ld0.Spemmxu1 Single-Phase Power And Energy

    Section 2 1MAC252756-MB B Modbus data mappings RegA Type Scale IEC 61850 name SA name Description Values .DmdWh.actVal Accumulated Forward active 0...1E10 energy (high) , phase B [kWh] .DmdWh.actVal (low word) .DmdVArh.actVal Accumulated Forward reactive 0...1E10 energy (high) , phase B [kWh] .DmdVArh.actVal (low word)
  • Page 105 Section 2 1MAC252756-MB B Modbus data mappings RegA Type Scale IEC 61850 name SA name Description Values (low word) .VAr.phsC.cVal.mag Reactive power Q (high) , phase -/+ 999,999 (low word) .VA.phsA.cVal.mag Apparent power S (high) , phase -/+ 999,999 (low word) .VA.phsB.cVal.mag Apparent power S (high), phase -/+ 999,999...

  • Page 106: Ld0.Spemmxu1 Single-Phase Power And Energy Measurement (1) - Sp, Se-1

    Section 2 1MAC252756-MB B Modbus data mappings 2.4.2.10 LD0.SPEMMXU1 Single-phase power and energy measurement (1) – SP, SE-1 Table 179: LD0.SPEMMXU1 Single-phase power and energy measurement (1) – SP, SE-1 RegA Type Scale IEC 61850 name SA name Description Values LD0.SPEMMXU1 .W.phsA.instCVal.mag PL1-kW:1...

  • Page 107: Controls

    Section 2 1MAC252756-MB B Modbus data mappings Controls Table 180: Explanations of the controls table columns Column name Description Coil (0X) address for control value. Control structure and bit within the structure for control value. IEC 61850 name Original IED data object identification. Described in the IEC 61850 format as Logical Device.Logical Node and thereafter .Data Object.Data Attribute.

  • Page 108: Ctrl.cbcswi1 Circuit Breaker Control (1)

    Section 2 1MAC252756-MB B Modbus data mappings IEC 61850 name SA name Description Values 2072 2.12 .RsSprChaTm.Oper.ctlVa Reset CB spring charge time 1=Reset LD0.RESCMMXU1 2073 2.13 .RecRs.Oper.ctlVal Reset Io (1) max demands 1=Reset LD0.RESVMMXU1 2074 2.14 .RecRs.Oper.ctlVal Reset Uo (1) max demands 1=Reset 2.5.2 CTRL.CBCSWI1 Circuit breaker control (1)

  • Page 109: Ctrl.dcxswi2 Disconnector Control (2) - 29Ds-2

    Section 2 1MAC252756-MB B Modbus data mappings 2.5.4 CTRL.DCXSWI2 Disconnector control (2) – 29DS-2 Table 184: CTRL.DCXSWI2 Disconnector control (2) – 29DS-2 IEC 61850 name SA name Description Values CTRL.DCCSWI2 2150 7.06 .Pos.Oper.ctlVal Select open 1=Select 2151 7.07 .Pos.Oper.ctlVal Select close 1=Select 2152 7.08...

  • Page 110: Ld0.Spcgapc2 Generic Control Point (16 Pcs) (2) - Spc-2

    Section 2 1MAC252756-MB B Modbus data mappings Table 187: LD0.SPCGAPC1 Generic control point (16 pcs) (1) – SPC-1 IEC 61850 name SA name Description Values LD0.SPCGAPC1 2112 5.00 .SPCS01.ctlVal Output 1 control 0/1=Off/On 2113 5.01 .SPCS02.ctlVal Output 2 control 0/1=Off/On 2114 5.02 .SPCS03.ctlVal...

  • Page 111: Ld0.Srgapc1 Set-Reset (8 Pcs) (1) - Sr-1

    Section 2 1MAC252756-MB B Modbus data mappings IEC 61850 name SA name Description Values 2136 6.08 .SPCS09.ctlVal Output 9 control 0/1=Off/On 2137 6.09 .SPCS10.ctlVal Output 10 control 0/1=Off/On 2138 6.10 .SPCS11.ctlVal Output 11 control 0/1=Off/On 2139 6.11 .SPCS12.ctlVal Output 12 control 0/1=Off/On 2140 6.12...

  • Page 112: Unmapped Control Points

    Section 2 1MAC252756-MB B Modbus data mappings 2.5.11 Unmapped control points Table 191: Unmapped control points IEC 61850 name Description Value LD0.LLN0.MeasStatRs.Oper.ctlVal Reset all min. and max. demands 1=Reset LD0.LLN0.PQRs.Oper.ctlVal Reset all power quality data 1=Reset LD0.FLTRFRC1.RcdRs.Oper.ctlVal Reset fault record data 1=Reset 2.5.12 Unmapped controls...

  • Page 113: Ld0.Udfcnt4 Multipurpose Generic Up-Down Counter (4) - Ctr-4

    Section 2 1MAC252756-MB B Modbus data mappings 2.5.12.4 LD0.UDFCNT4 Multipurpose generic up-down counter (4) – CTR-4 Table 195: LD0.UDFCNT4 Multipurpose generic up-down counter (4) – CTR-4 IEC 61850 name SA name Description Values RsCnt.Oper.ctlVal Reset counter Resets counter value 0=Cancel; 1=Reset Loads the counter to LodCnt.Oper.ctlVal Load counter...

  • Page 115: Section 3 Glossary

    Section 3 1MAC252756-MB B Glossary Section 3 Glossary ANSI American National Standards Institute Electromagnetic compatibility High-speed output IEC 61850 International standard for substation communication and modeling Intelligent electronic device Light-emitting diode LHMI Local human-machine interface Modbus A serial communication protocol developed by the Modicon company in 1979.
  • Page 116 — ABB Distribution Solutions Distribution Automation P.O. Box 699 FI-65101 VAASA, Finland Phone +358 10 22 11 ABB Inc. 655 Century Point Lake Mary, FL 32746, USA Phone +1-800-222 1946 www.abb.com/mediumvoltage www.abb.com/relion www.abb.com/substationautomation © Copyright 2019 ABB. All rights reserved.

This manual is also suitable for:

Rem615 ansi

Table of Contents