Additional Information - Philips ProScreen PXG10 User Manual

9. ADDITIONAL INFORMATION

CAUTION!
– To avoid injury to yourself and damage to the lamp, be sure
to carefully follow the steps below.
– Before or after replacing the lamp, be sure to clean the air
filters. See page 25 for cleaning the air filters.
Resetting the lamp timer
1. Connect the power cord.
– Plug the power cord into the AC socket of the projector.
2. While pressing 4, 2 and OK on the projector, press Power
ON on the projector.
– 'Lamp 0000H' is displayed, indicating that the lamp timer is
reset.
KENSINGTON LOCK
This projector has a Kensington Security Standard slot for use
with a Kensington Micro Saver Security System. Refer to the
information that came with the system for instructions on how
to use it to secure the projector.
Kensington
Security
Standard connector
Maintenance
) )
27