Appendix A Elevating The Rack - Huawei RP100 Installation Manual

Appendix A Elevating the Rack

The RP rack can be elevated by about 150 mm.
If the HD display and TE30/VPC600 have been installed onto the rack, uninstall them and
elevate the rack.
1 Press the RP power button to turn it OFF.
3
Remove the rear cable cover.
Disconnect all cables of the TE30/VPC600.
4
To remove the HD display, first disconnect
6
all attached cables.
DANGER
The HD display requires at least two people to
lift or move it. Exercise caution when lifting or
moving it.
Lift up the HD display, with one hand
7
supporting the bottom and the other
hand holding the top of the HD display.
CAUTION
To prevent screen scratching and damage, clear the installation site and ensure that no
obstacles or sharp objects are around the HD display.
8
Dismount the HD display from the rack and place it onto the soft cushion on the floor.
To remove the TE30/VPC600, first
2
remove the crimping cover.
5
Remove the camera spacer.
Use a Phillips screwdriver to
remove the two screws.
43