Huawei RP100 Installation Manual page 48

Appendix A Elevating the Rack
14
To elevate the rack bracket, loosen the six M6 hexagonal socket screws of the rack bracket.
15 1. Adjust up the rack bracket, as shown in the figure under step 1.
2. Secure the rack bracket, as shown in the figure under step 2.
Move the left and right rack brackets to the
level of upper-row screws.
Upper-row
screws
Lower-row
screws
CAUTION
Just loosen the screws. Do not remove them.
Use the M6 hex socket wrench to tighten
the six screws.
45