Walk Test All Invisible Burg Points; Silence Function; Custom Function; Keypad Programming - Bosch B9512G Program Entry Manual

Control Panel
–
–
–
This function allows the user to change the Time from the keypad to make adjustments to
Skeds. This is a panel wide function that can be executed from any keypad assigned to an area
where the user has authority.
RPS Menu Location
User Configuration > User Keypad Functions > Change Skeds
9.3.31

Walk Test All Invisible Burg Points

Default: P
Selections: - , E, P
–
–
–
This function allows a user with Invisible Walk Test authority to test invisible intrusion points
that are within the scope of the keypad without sending a report to the central station.
Invisible points must have the Invisible Point parameter set to Yes.
24-Hour points left off-normal when exiting the Invisible Walk Test are bypassed. A trouble
tone sounds until it is silenced. The keypads will alternate text with the Bypass indications.
RPS Menu Location
User Configuration > User Keypad Functions > Walk Test All Invisible Burg Points
9.3.32

Silence Function

Default: E
Selections:
–
–
This parameter enables or disables the silence function.
RPS Menu Location
User Configuration > User (Keypad) Functions > Silence Function
9.3.33

Custom Function

Default: Passcode (P)
Selections: - , E, P
–
–
–
This function sets whether a passcode will be required (or not) when attempting to access a
Custom Function from the Shortcut Menu, A-Key, B-Key, C-Key, or a Keyfob.
The B9512G supports Custom Function 128 to 159.
The B8512G supports Custom Function 128 to 135.
RPS Menu Location
User Configuration > User Keypad Functions > Custom function
9.3.34

Keypad Programming

Default: P
Selections: - , E, P
–
–
Bosch Security Systems, Inc.
Disable (-) - Disable this function panel wide regardless of the user's authority level.
Enable (E) - Enable this function panel wide without requiring a passcode.
Passcode (P) - Require a passcode to enable this function panel wide.
Disable (-) - Disable this function panel wide regardless of the user's authority level.
Enable (E) - Enable this function panel wide without requiring a passcode.
Passcode (P) - Require a passcode to enable this function panel wide.
Enable (E) - Enable this function panel wide without requiring a passcode.
Passcode (P) - Require a passcode to enable this function panel wide.
Disable (-) - Disable this function panel wide regardless of the user's authority level.
Enable (E) - Enable this function panel wide without requiring a passcode.
Passcode (P) - Require a passcode to enable this function panel wide.
Disable (-) - Disable this function panel wide regardless of the user's authority level.
Enable (E) - Enable this function panel wide without requiring a passcode.
Program Entry Guide
User Configuration | en 157
2017.03 | 09 | F.01U.303.998