Hitachi CP-X2511N Service Manual page 54

CP-X2511N(C15I-25N2) / CP-X3011N(C15I-30N2) / CP-X4011N(C15I-40N2) / CP-X2011N(C15-20N2) / ED-X45N(C15-20N2)
■ Attaching the MAIN and INPUT boards.
Assemble in reverse order of the disassembling procedure described in the last section.
Use specified type of screws when re-assemblimg.
Fasten the F-guard earth metal and the
earth metal with the screw (T3x12).
Attach the F-guard earth metal so that
the fan guard and the rib of the lamp
house come into the part of the F-guard
earth metal directed by the arrow.
T3x12 screw
MAIN board
CAUTION
Fasten the main
board, the earth metal
and the CNGD1 cable
with this screw.
Never swing the
screwdriver while you
tighten this screw.
Otherwise, the I/O
metal will change.
54
F-guard
Earth metal
Rib
(lamp house)
Fan guard
Earth metal
CNGD1 cable
M4x8