Audio Toggle - Motorola MTP8500Ex User Manual

4.10.5.2.1
Setting Howling Suppression
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Audio → Howling Suppr..
3 Select required setting.
NOTICE: Your service provider can set up the state of the howling suppression on
powering up the radio. Depending on the settings, the radio can either disable the
howling suppression or set the last remembered state.
4.10.5.3

Audio Toggle

You can control audio routing between the speaker and earpiece for any private or group call through
the dedicated Speaker Control key. You can also define through the menu to have all group calls in
high audio or controlled by the Speaker Control key.
4.10.5.3.1
Setting Audio Toggle
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Audio → Audio Toggle.
3 Select one of the following:
• Always Loud — The audio sound comes from the speaker (high audio only). S
C key is disabled.
ONTROL
• Spkr Cntrl — The audio goes through the earpiece or the speaker. You can switch between
low and high audio by pressing S
4.10.6
Tones
This field sets the volume level for the tones set.
NOTICE: The radio has two tone packs: Classic Tones (default) and New Tones. Your service
provider decides which tone pack is enabled.
4.10.6.1
Keypad Tone
You can activate/deactivate keypad tone at every key press.
4.10.6.1.1
Setting Keypad Tone
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Tones → Keypad Tone.
3 Select one of the following:
Send Feedback
C key.
PEAKER ONTROL
MN002033A01–AC (en-US)
Chapter 4: Main Menu
PEAKER
103