Measuring The Tool Length With The Workpiece As Reference Point - Siemens SINUMERIK 840D Operating Manual

2.5.2

Measuring the tool length with the workpiece as reference point

Procedure
Note
Tool measurement is only possible with an active tool.
Milling
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
1. Insert the tool you want to measure in the spindle.
2. Select "JOG" mode in the "Machine" operating area.
3. Press the "Meas. tool" and "Length manual" softkeys.
The "Length Manual" window opens.
4. Select the cutting edge number D and the number of the replacement
tool ST of the tool.
5. Approach the workpiece in the Z direction, scratch it with a turning
spindle and enter the set position Z0 of the workpiece edge.
6. Press the "Set length" softkey.
The tool length is calculated automatically and entered in the tool list.
Setting up the machine
2.5 Measuring the tool
63