Mdc Configuration Examples; Mdc Configuration Example In Standalone Mode - HP FlexFabric 12500 Series Configuration Manual

Task
Display MDCs and their status.
Display the interfaces of MDCs.
Display the CPU, disk space, and memory space
usage of MDCs. (In standalone mode.)
Display the CPU, disk space, and memory space
usage of MDCs. (In IRF mode.)
Executive the following display commands in any view on a non-default MDC:
Task
Display the ID, name, and status of the MDC.
Display the interfaces of the MDC.
Display the CPU, disk space, and memory space
usage of the MDC. (In standalone mode.)
Display the CPU, disk space, and memory space
usage of the MDC. (In IRF mode.)

MDC configuration examples

MDC configuration example in standalone mode

Network requirements
Use one 12500 switch to meet the Internet access requirements of three companies.
Company A is a network company and has a large data center with many servers and storage devices.
It needs more disk space and more operation data resources than Company B and Company C.
Company B and Company C are both financial companies. They have higher network availability and
security requirements and hope to have their own "separate" access devices.
Compared with Company A and Company B, Company C has less Internet traffic.
Command
display mdc [ name mdc-name ]
display mdc [ name mdc-name ] interface
display mdc [ name mdc-name ] resource [ cpu | disk |
memory ] [ slot slot-number ]
display mdc [ name mdc-name ] resource [ cpu | disk |
memory ] [ chassis chassis-number slot slot-number ]
Command
display mdc
display mdc interface
display mdc resource [ cpu | disk | memory ] [ slot
slot-number ]
display mdc resource [ cpu | disk | memory ] [ chassis
chassis-number slot slot-number ]
67