Indoor Unit Setting Item - LG AC Smart II Owner's Manual

Web schedule function

[Indoor unit setting item]

Item
Set temperature
Operation
Mode
Fan speed
Fan direction
Lock
34
AC Smart II (Advanced Control Smart II)
You can set the desired indoor temperature.
You can set the indoor unit to run and stop.
• [Run]: This turns on the power of the indoor unit.
• [Stop]: This turns off the power of the indoor unit.
You can set the operating mode of the indoor unit.
• [Cooling]: This runs the unit in air conditioning mode. You can select the
desired temperature between 18°C and 30°C from the set temperature. When
the desired temperature is higher than the indoor temperature during the air
conditioning operation, the unit will run in the fan mode.
• [Heating]: This runs the unit in heating mode. You can select the desired
temperature between 18°C and 30°C from the set temperature.
• [Auto]: This judges the indoor condition and maintains at optimal condition
automatically.
• [Dry]: This runs the unit in dehumidifier mode. During the rainy season or
when the humidity is high, you can effectively remove the humidity with this
mode. When you set the indoor unit to this mode, you cannot set a desired
temperature.
• [Fan]: This runs the unit in fan mode. Fresh air will be provided by running the
air purifier. It is good to use this just for air purification during the spring or fall.
When you set the indoor unit to this mode, you cannot set a desired
temperature.
This sets the fan level of the indoor unit. Adjust the fan level considering the
level of indoor contamination.
• [Low]: This sets the Fan speed to low level.
• [Med]: This sets the Fan speed to medium level.
• [High]: This sets the Fan speed to high level.
• [Auto]: This measures the level of indoor contamination automatically and
maintains the optimal condition.
Enable/Disable the lock function for the user to individually control the unit.
• [Set]: The fan direction automatically rotates.
• [Cancel]: The fan direction stays consistent.
This sets the lock function so that the user cannot control the indoor unit.
• [Lock all]: This sets the lock function so that all the functions of the indoor unit
cannot be changed individually.
• [Unlock all]: This cancels the lock all function.
• [Mode lock]: This locks the operating mode of the indoor unit so that it cannot
be controlled individually.
• [Mode unlock]: This cancels the mode lock function.
• [Fan lock]: This locks the fan level so that it cannot be controlled individually.
• [Fan unlock]: This cancels the fan level lock function.
Description