LG AC Smart II Owner's Manual page 35

Item
Lock
Set limit temperature
[Ventilator schedule setting item]
Item
Operation
Mode
Fan speed
Lock
User mode
• [Set temperature lock]: This locks the set temperature so that it cannot be
controlled individually.
• [Set temperature unlock]: This cancels the set temperature lock function.
You can limit the indoor temperature setting so that the indoor temperature is set
within a certain temperature range. In this case, the temperature outside of the
set temperature range cannot be controlled individually by the user.
You can set the ventilator to run and stop.
* [Run]: This turns on the power of the ventilator.
* [Stop]: This turns off the power of the ventilator.
You can set the operating mode of the ventilator.
• [Heating]: This runs both the inlet and outlet of the ventilator through the heat
exchanger. Use this mode during the summer and winter when the
temperature and humidity difference between indoors and outdoors is
significant.
• [Normal]: This runs only the inlet of the ventilator through the heat exchanger.
Use this mode during the spring and fall when the temperature and humidity
difference between indoors and outdoors is not significant.
• [Auto]: This measures the indoor and outdoor temperature and automatically
controls the inlet and outlet. Through this, optimal condition is maintained by
maintaining a consistent balance of the indoor air.
This sets the fan level of the ventilator. Adjust the fan level considering the level
of indoor contamination.
• [Low]: This sets the Fan speed to low level.
• [High]: This sets the Fan speed to high level.
• [Super high]: This sets the Fan speed to the maximum level.
• [Auto]: This measures the level of indoor contamination automatically and
maintains the optimal condition. Auto mode cannot be selected by the user and
when the power save mode or speed mode of the user mode are set, it is
automatically set.
This sets the lock function so that the user cannot control the ventilator.
• [Lock]: ]: This sets the lock function so that all the functions of the ventilator
cannot be changed individually.
• [Unlock]: This cancels the lock function.
This designates the additional operating method of the ventilator.
• [Humid on]: This sets the plasma function. Depending on the type of the
ventilator, the function may not be set. This function is currently not supported
and is expected to be supported in the future.
• [Humid off]: This cancels the plasma function.
Web schedule function
Description
Description
Option function manual
35