JVC XM-P55 Service Manual page 20

XM-P55
XM-PJ1
Removing the Door Cover
1. Remove the bottom cover.
2. Remove the front cover.
3. Remove the cabinet.
4. Push the lower part of the door lock lever outside on the
lower front side of the body, and open the door.
5. Remove the two G screws attaching the door cover on
both sides of the body, and remove the door cover.
CAUTION: When reattaching the flexible harness 1,
position it to the six g points and fix it with a
double-sided tape (See Fig.10).
Removing the Mechanism Assembly
1. Remove the bottom cover.
2. Remove the front cover.
3. Remove the cabinet.
4. Remove the main board.
5. Remove the two H screws attaching the mechanism
assembly and remove the mechanism assembly from the
flame assembly.
2-18
(See Fig.12, 13)
(See Fig.14)
Mechanism assembly
Door cover
G
Door lock lever
Flame assembly
H
Door lock lever
Fig. 12
Door cover
Flame assembly
Fig. 13
Fig. 14
G
H