JVC XM-P55 Service Manual page 23

(Fold fast.)
<Reassembling the Pickup Unit>
1. Prior to performing the following procedures, fold the
flexible harness of the pickup unit (see Fig.7,8 and 9). Fix
the flexible harness with a spacer not to unfold.
2. Attach the U-shaped slot of the pickup marked 'e' to the
guide base.
3. For the shaft, firstly attach its shaft base side and next
attach its feed motor base side.
4. Attach a spacer to the folded flexible harness and fix the
flexible harness to the chassis assembly (see Fig.7, 8).
5. Attach a spacer between the chassis boss and the
flexible harness (see Fig.9).
6. Make sure that the flexible harness is folded fast and
fixed to the right position.
Attach a spacer
Fig.8
(Attach a spacer.)
Fig.7
Attach this position
Chassis assembly
Flexible harness
(Fix fast not to unfold.)
Part e
Shaft
Guide base
Attach a spacer
Chassis boss
Spacer
XM-P55
XM-PJ1
(Fold fast.)
B
Hold spring
Pickup unit
Feed motor
Fig.5
Spacer
Chassis boss
Fig.9
2-21