JVC XM-P55 Service Manual page 22

XM-P55
XM-PJ1
Removing the Pickup Unit
1. Remove the slit washer on the reverse side of the MD
mechanism and remove the worm gear.
2. Remove the screw B and the hold spring.
3. Detach the shaft of the pickup unit on the feed motor
side, and the other side.
4. Remove the spacer of the flexible harness extending from
the pickup unit (marked d), and remove the pickup unit
from the chassis assembly.
Removing the Pickup (See Fig.5, 6)
1. Remove the screw C from the pickup unit and the lead
spring.
2. Pull out the main shaft from the pickup.
C
Pickup
Fig.6
2-20
(See Fig.4, 5)
Lead spring
Main shaft
Slit washer
Worm gear
d
Part e
Shaft
Guide base
Chassis assembly
B B
Hold spring
Fig.4
B
Hold spring
Pickup unit
Feed motor
Fig.5