Advertisement
A2
A3
A1
HID-DV
Inrush current
Type
HID-D DALI 100-150 /S CDO/SON/SDW
Electrical data
Type
HID-D DALI 100-150 /S CDO/SON/SDW
Ordering and packing data
Type
HID-D DALI 100-150 /S CDO/SON/SDW
Electrical installation notes
Mains operation
Rated mains voltage
With tolerances for performance
+6%-8%
With tolerances for operation
Mains frequency
Power factor 100% power
Power factor 35% power
Earth leakage current
Overvoltage protection
Lamp operation
Operation frequency (typical)
Ignition voltage
Cable capacity
SON-100-150W lamps (2.7 kV)
CDO-lamps (3.3 kV)
Air and creepage distance from any
(metal) part that may become live,
to earthed environment (class I) or
test finger (class II)
Type
A1Nom
HID-DynaVision DALI
Maximum
Inrush
gear number
current
on MCB
Peak
(x)
(A)
6
50
Number
Rated
of
Gear-
Lamps
Lamp
(x)
Power
1
100-150
EAN code
Weight
1 piece
8711500928733
0.725 kg
220-240 V
203-254 V
180-264 V
50/60 Hz
>0.98
>0.93
<0.2 mA per driver
48 hrs at 325 Vac
2 hrs at 366 Vac
5 min. at 400 Vac
125 Hz
3-4 kV
Max. 1 nF
Max. 0.5 nF
>4 mm
HID-DynaVision DALI SON and CDO
A2Nom
A3Nom
150.0
134.0
136.0
Inrush
current
Width
(ms)
0.45
Line
Line
T-case
Frequency
Voltage
life
(Hz)
(V)
(ºC)
50/60
220-240
90
Qty bulk
Dimensions bulk packing
packing
10
39.8 cm x 16 cm x 11.1 cm
Notes:
1. With three-phase mains supply, neutral should never be
disconnected; otherwise circuitry could be damaged.
2. For proper EMC, wiring inside luminaire should be as straight and as
short as possible; mains wires should not run parallel to lamp wires.
3. Driver should be mounted in luminaire >min IP 23.
4. Thermo-protected circuit incorporates self-resetting facility; ignition
attempts stop after seven minutes; mains supply must be switched off
and on to reset driver.
5. Insulation resistance test: 500 Vdc from Line/Neutral to Earth (not
between Line and Neutral). Ensure that the Neutral is reconnected
again after abovementioned test is carried out and before the
installation is put into operation.
B1Nom
B2Nom
C1Nom
90.0
70.0
40.0
T-case
T-ambient
Ignition
maximum
Voltage
(ºC)
(kV)
100
45
4.00
EAN code
bulk packing
8711500928740
OEM Catalogue 2009/2010
D1Nom
4.5
Cable-Cap
outputwires
mutual
(pF)
1000
EOC
8711500
928733 30
3.113
Advertisement
