Advertisement
HID-Basic BSN/BMH semi-parallel ignitor
BSN
3.128
OEM Catalogue 2009/2010
Product Description
Impregnated electromagnetic copper/iron gears for use with an
●
external semi parallel ignitor for CDM, CDO, MH, HPI (Plus) and
SON lamps
Features and Benefits
Compact dimensions and light weight with minimal watt losses,
●
thanks to orthocyclic winding process
Control gear can be installed remotely; substantial distance allowed
●
between gear/ignitor & lamp
Equipped as standard with screw terminal blocks; insert contact on
●
request
Earthing-while-mounting facility
●
Gear can also be used in combination with series (superimposed)
●
ignitor
Versions with ThermoSwitch available for protection against end- of
●
-lamp- life phenomena (TS mandatory for operation of CDM lamps).
Applications
Ideal for the following applications:
●
Recreational sports lighting, indoor and outdoor
○
Road and residential lighting
○
Floodlighting of buildings and monuments
○
Area lighting, e.g. harbors, building sites
○
Canopy lighting, e.g. petrol stations
○
Horticulture
○
Climatic suitability: restricted to built-in situations where relative
●
humidity is limited
Quality
Philips Quality assures optimum quality regarding:
System supplier: As manufacturers of lamps and electromagnetic
●
control gear, Philips ensures that, from the earliest development
stage, optimum lamp/gear performance is maintained.
European standards: Philips HID electromagnetic gears comply with
●
all relevant international rules and regulations.
Compliances and approvals
Safety
Performance
RFI
Harmonics
EMC immunity
Approval marking
CE-marking
Environmental standard
Recommended lamp page 3.170
www.philips.com/OEM
EN 61347-2-9
EN 60923
EN 55015
EN 61000-3-2
EN 61547
ENEC
ISO 14001
Advertisement
