Advertisement
HID-HeavyDuty BSN semi-parallel ignitor
BSN
3.134
OEM Catalogue 2009/2010
Product Description
Encapsulated electromagnetic copper/iron gears for use with an
●
external semi-parallel ignitor for CDM, CDO, MH, HPI (Plus) and
SON lamps (no ignitor needed for SON-I lamps)
Features and Benefits
Outstanding product life
●
Excellent resistance to chemical attack, humid conditions and high
●
environmental stress crack resistance
Separate earth terminal
●
All gears are equipped with ThermoSwitch protection against end-
●
of-lamp-life phenomena
Compact dimensions and light weight with minimal watt losses,
●
thanks to orthocyclic winding process
Equipped as standard with screw terminal blocks
●
Gear can also be used in combination with a series (superimposed)
●
ignitor
Gears for alternative mains voltages/frequencies on request
●
Applications
Ideal for the following applications:
●
Outdoor: tunnels and parking areas
○
Outside luminaire: in the pole or electrical cabinet
○
Road and residential lighting
○
Area lighting, e.g. harbors, building sites, city centres, shopping
○
centres, pedestrian areas
Climatic suitability: use in luminaires under normal humidity
●
conditions (not drip-proof)
Quality
Philips Quality assures optimum quality regarding:
System supplier: As manufacturers of lamps and electromagnetic
●
control gear, Philips ensures that, from the earliest development
stage, optimum lamp/gear performance is maintained.
European standards: Philips HID electromagnetic gears comply with
●
all relevant international rules and regulations.
Compliances and approvals
Safety
Performance
RFI
Harmonics
EMC immunity
Approval marking
CE-marking
Environmental standard
Recommended ballast page 3.170
www.philips.com/OEM
EN 61347-2-9
EN 60923
EN 55015
EN 61000-3-2
EN 61547
ENEC
ISO 14001
Advertisement
