Call Forward - LG WIT-400H Operation Manual

WIT-400H User Manual
Issue: 0.1A
To retrieve the call during a holding
Press Left Soft Key + 4.Hold menu or Press [LEFT] in navigation key + select Hold + [ OK ]
To hold a call and make a new call
After holding a call, Enter phone number and Press [ Send ](
Condition
1. The Call must be answered before Hold can be initiated.
2. The WIT-400H will receive hold recalling after hold recall timer. At this time, WIP-Phone can
answer the ring by pressing Send button.
3. Only 1 call at a time may be placed on hold
4. IPECS will provide hold music to the held user during holding
5. When there are several held lines , the user can select the held line with pressing number ( [1]
or [2] or [3] ) or navigation UP/DOWN and [OK] .
5.2.3

Call Forward

Description
This feature provides a user the ability to forward calls under the certain condition. A user may forward a
call to a certain station, station group, MFIM or an external party.
The following call forward types are supported.
- Unconditional, Busy, No-answer, Busy/No answer, Off-net, No answer Off-net
Operation
In Idle State + Press [Menu] + select {1. Call Forward} + [ OK ] + Enter Forward Type + Enter Station
Number + Enter Wait time + Press [OK].
Condition
1. When Call Forward is active, a station can make outgoing calls (internal or external) but cannot
activate a Call back or Queue request.
This Document Contains proprietary information and may not be reproduced or copied without express
Written permission of a duly authorized representative of LG-Nortel Co.Ltd
) key.
26
Date: 28/July/2009