Call Waiting; Call Park - LG WIT-400H Operation Manual

WIT-400H User Manual
Issue: 0.1A
2. Attempting activation of Call Forward will automatically deactivate any activate Custom Display
Message. Active Call Back or Queue requests are not canceled.
5.2.4

Call Waiting

Description
Call Waiting is used to notify a busy station that an Intercom call is 'waiting'. The busy station is notified of
the call waiting by "Camp-on" tone.
After receiving a busy signal, the calling station Camps-on to the called station. The called station, can
respond by:
1. Answering the waiting call, placing the active call on Hold first.
2. Sending a Silent Message,
3. Activating One-Time DND, or
4. Ignoring the Camp-On tone.
Operation
During Called party is busy
If a user dials a busy station, CALL WAIT alerts call waiting to a busy station.
After receiving intercom busy tone, press
When a busy terminal engaged an ICM or CO call is called through camp-on by a new caller.
The called station will hear camp-on tone. Then the called party can answers to a new call by
pressing [ Send ](
Press [ Send ](
MESSAGE come from IPECS is displayed on the LCD.
Press [ Send ](
NOTE : Pressing End button to release the active call (CO call or intercom call)
5.2.5

Call Park

Description
A user can park using CO line to CO line parking location.
Operation
Call Park
While connected to an outside call;
This Document Contains proprietary information and may not be reproduced or copied without express
Written permission of a duly authorized representative of LG-Nortel Co.Ltd
*
).
) to connect to the other calling station. The former calling party is on hold.
) to back to the former calling party .
*
or the last digit of the called station number.
27
Date: 28/July/2009