Call Pick-Up - LG WIT-400H Operation Manual

WIT-400H User Manual
Issue: 0.1A
Press [SYSTEM] + select {Flash} + [ OK ] + Dial a parking location.
The CO line being used is on hold and the WIP-Phone goes to an idle state.
Retrieving a parked call
Dial a parking location + Press [ Send ](
Parking Location Number
SYSTEM
IPECS 601 – 610 for MFIM, 601-619 for MFIME
Notes : A Parking Location Area will be changed by LG-Nortel
Condition
1. Call Park is only applied to a user that is in talk status.
2. Call Park is only applied to a parking location area.
3. A parked number will be displayed on the LCD after timer LDK sends release command.
(Display the LCD message come from IPECS)
4. WIP-Phone goes Idle state after receiving the RTI command.
5. Parked call will recall after time out.
5.2.6

Call Pick-Up

Description
This function is to pick up a call instead of another user who is called. It can be used after programming at
the IPECS attendant station.
Operation
Group Call Pick-up
A station can answer ("Pick-up") incoming and transferred Intercom, CO and IP calls ringing at another
station in the same Station Pick-up Group. All ringing calls except for Private Lines and queue callbacks
are subject to Pick-up by other group member stations.
In addition stations in other types of Station Groups, if allowed, may use Group Call Pick-up.
1. Dial the Group Call Pick-up access code 566.
2. Press [ Send ](
This Document Contains proprietary information and may not be reproduced or copied without express
Written permission of a duly authorized representative of LG-Nortel Co.Ltd
PARKING LOCATION NUMBER
)
)
28
Date: 28/July/2009