Page 2
For automatic driver updates, go to: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
X23T-1 MHL Operating Manual Your LCD screen... Important notes Getting started Operation Notes on ergonomic colour adjustment Troubleshooting Explanatory information about standard ISO 9241-307 Technical specification...
Page 6
Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.
You don’t need to be an "expert" to perform the operations described here. Nonetheless, it is important to always observe the safety notes given in the operating instructions for the computer and in this manual. In the event of any problems, please contact your sales office or our Service Desk. Fujitsu...
"Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://fujitsu.com/fts" • Names of CDs, DVDs and titles or designations of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety" Manual indicates a button on the monitor, e.g:...
(electric shock, fire risk). • Only use the screen resolution settings and refresh rates specified in Chapter "Technical specification", Page 34. Otherwise you may damage the device. If you are in any doubt, contact your sales outlet or our Help Desk. Fujitsu...
The surface of the casing can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild domestic detergent and then carefully wrung out. Fujitsu...
E-Mail: info@recupel.be "http://www.swico.ch" "http://fujitsu.com/fts/remarketing" "http://www.recupel.be" Asia Taiwan: Fujitsu America, Inc. Environmental Protection 1250E. Arques Avenue Administration Sunnyvale, CA 94085 U.S.A. Executive Yuan R.O.C. Phone No.: (408) 746-6000 "http://recycle.epa.gov.tw" Information on this subject is also available on the Internet at "http://fujitsu.com/fts/recycling". Fujitsu...
► Should you discover that the delivery does not correspond to the delivery note, notify your local sales outlet immediately. Do not discard the original packing material of the devices. You may need the packaging in the future if you need to transport your device. Fujitsu...
To ensure sufficient ventilation, the air inlet and outlet openings of the device must be kept clear. Setting up an ergonomic video workstation ► Do not position the video workstation opposite a window (1). ► Position the monitor outside the reach of a light source (1). Fujitsu...
Page 16
► Position the monitor so that the eye distance to the screen (1) is around 50 cm. 50 cm ► Position the monitor for optimum viewing (1). The monitor should under no circumstances fall outside the permissible viewing space (2). Fujitsu...
After unpacking the monitor, it is in transport position. The display is inclined to the lowest possible position ► Place the monitor on a desk ► Grasp the monitor with both hands on the left and right edge of the display and pull it up (1) towards working position. Fujitsu...
The tilt of the monitor can be adjusted by –5° (forward) and +25° (back) from its vertical position. ► Hold the monitor with both hands on the left and right sides of the display and move it to the desired angle. Fujitsu...
• Content Protection MHL fully supports High-bandwidth Digital Content Protection (HDCP) technologies for the safeguarding of high-value digital motion pictures, television programs and audio against unauthorized interception and copying Fujitsu...
MHL function. It may take some seconds until the MHL screen will be shown. It is also depending on the mobile device. If the mobile device does not support MHL, then there will be no image shown to the monitor. Fujitsu...
Page 21
This product is officially MHL-certified. If you encounter any problem when using the MHL function, please contact the manufacturer of the mobile device. The picture quality may degrade when content (imported from the mobile device) with a low resolution is played on the product. Fujitsu...
► Plug the power connector of the computer into a properly grounded mains outlet. If your computer has two monitor ports ("onboard" screen controller and separate graphics card), the monitor port for the separate graphics card is active as standard. Fujitsu...
Monitor and computer are switched on (ECO mode). orange Monitor is not receiving a video signal or is in power saving mode. does not light up Monitor is switched off. ► Switch the device on again with the ON/OFF switch (1). Fujitsu...
The ECO operating mode is the preset factory default. Once an input is made at the computer the screen contents are restored. For detailed information on how energy-saving mode operates, please refer to the operating manual or technical manual of the computer. Fujitsu...
OSD. Performing auto-adjustment of the monitor (for VGA input only) ► Press the button for about 1 second. AUTO The Auto Processing message appears Picture quality and position are set to optimum values for your system. Fujitsu...
If you press the ECO button, the following settings are changed: • the brightness will be adjusted to an energy-saving level • the power button LED will illuminate in green After the ECO operating mode is switched off, the brightness previously set by the user is restored. Fujitsu...
► Press the or the button to highlight another icon (e.g. Image adjust). ► Press the MENU button to select the highlighted icon. The Image adjust settings window is displayed. ► Press the AUTO button to exit the main menu. Fujitsu...
Page 29
MENU AUTO button to exit the function without making any changes. If you want to change other settings, select the corresponding function from the OSD main menu. All possible adjustments of the main menu are described in the following. Fujitsu...
Office presets (the settings for colour and sharpness can be adjusted) Photo Photo presets (colour, sharpness, saturation) Video Video presets (colour, sharpness, saturation) Game Game presets (colour, sharpness, saturation, ACR, OD) ACR = Dynamic contrast (on / off) OD = Overdrive Fujitsu...
Mute Switch the loudspeakers off or on Input Selects the Audio Input. HDMI Audio = Plays the sound via internal loudspeakers, coming from HDMI input PC Audio = Plays the sound via internal loudspeakers, coming from the PC input Fujitsu...
With this function all settings are reset to the factory settings without prompting for confirmation. The function is executed with the button. If you are using a VGA INPUT data cable, an Auto Processing message is displayed. The language selection menu appears. Fujitsu...
Operation Displaying information Call the Information setting window With this function the serial number, resolution, H/V frequency, input signal, colour setting and polarity of the synchronisation signal are displayed. Fujitsu...
+ Colour combination very suitable - Colour combination not suitable because colour hues are too close together, thin characters are not identifiable or rigorous focusing is demanded of the human eye. Fujitsu...
Picture is wrongly adjusted ► Run the Factory Recall function in the OSD menu. The Auto Processing message appears. Picture disturbances (vertical lines) ► Press the button to conduct the AUTO auto-adjustment of the screen. Fujitsu...
Page 36
Picture disturbances (horizontal lines, picture AUTO noise) auto-adjustment of the screen. The screen becomes darker The background lighting has a limited lifetime. If your monitor display should become too dark, the background lighting will have to be replaced. ► Contact our Service Desk. Fujitsu...
The maximum permitted number of faulty pixels is stipulated in the international standard ISO 9241-307. In accordance with standard ISO 9241-3, LCD monitors by Fujitsu comply with Class II for low resolutions and Class I for resolutions of 1680 x 1050 (1764000 pixel) and higher.
Technical specification Technical specification Condensation is not permitted, neither in the rated range of operation nor in the limit range of operation. X23T-1 MHL Model name: X23T-1 Dimensions and weight Visible diagonals 58.4 cm Dot pitch 0.2652 mm Image size Width 509.2 mm...
"Changing the monitor settings", Page 22). For ergonomic reasons, a screen resolution of 1920 x 1080 pixels is recommended. Because of the technology used (active matrix), an LCD monitor provides a totally flicker-free picture, even with a refresh rate of 60 Hz. Fujitsu...
Technical specification SUB D port Meaning Video input red Video input green Video input blue Ground Ground Video ground red Video ground green Video ground blue +5 V (DDC) Sync. ground Ground DDC Data H. sync V. sync DDC Clock Fujitsu...