Entering The Destination Road - Pioneer ANH-P9R-BK Operation Manual

Navigation
The place-distinguishing list is displayed if the
selection is ambiguous.
Select the required place using the rotary stick
and press the
NAVI/OK
The program switches to road or centre entry.
If no roads and only the centre can be selected
in the location entered, the program switches
directly to route menu.

Entering the destination road

Using the rotary stick, select
the button to confirm.
NAVI/OK
Select the letters one after the other by turning
the rotary stick and press the
to confirm. The enlarged selected letter appears
at the right of the display.
button to confirm.
and press
ROAD
button
NAVI/OK
Using the multifunction button
confirmed letter is deleted.
The complete entry is deleted if the multifunc-
tion button is pressed for more than 2
seconds.
Letters which are already entered are displayed
inversely. For the purpose of support, the exist-
ing entry is displayed at the next road to be
reached. The unit offers only the possible
remaining letters for selection.
If no other entries are available, the unit com-
pletes the road-name.
To accept the entry, press and hold the rotary
stick for more than 2 seconds or select the
small check  and briefly press the
button.
If the complete road-name was previously
entered or was automatically completed, the
program switches to either road-distinguishing
list or to route menu.
If an incomplete location entry was confirmed,
the road selection list is displayed.
Section
03
the last
NAVI/OK
23
En