Setting The Dab Priority Function; Switching The Auto Pi Seek - Pioneer ANH-P9R-BK Operation Manual

Section
Initial Settings
11

Setting the DAB priority function

When a hide-away DAB tuner (e.g., GEX-
P700DAB) is connected, you can set the
product in this mode so that a traffic informa-
tion interruption from the hide-away DAB tuner
takes precedence over this product's RDS traf-
fic announcement (TA) function.
1. With the source turned off, press and hold
1.
2. Press and then press
NEXT
the priority setting mode.
DAB
3. Press
DAB P
ting on.
appears in the display.
ON
• Press . again to turn the DAB priority
DAB P
setting off.
Note
• You can select to the DAB priority setting
mode only when a separately sold hide-away
DAB tuner (e.g., GEX-P700DAB) is connected.
With DAB priority ON
When the selected service component supports
road traffic flashes and transport flashes, DAB
reception is not interrupted by this product's
RDS traffic announcement (TA).
With DAB priority OFF
Interruption is by the first received news flash,
either this product's RDS or the hide-away DAB
traffic information broadcast.
84
En
. to select
DAB P
. to turn the priority set-
DAB

Switching the auto PI seek

During the preset station PI seek operation, you
can switch the auto PI seek function on or off.
(Refer to Using the PI seek function on page 49.)
1 With the source turned off, press and hold
1.
2 Press and then press
NEXT
the auto PI seek mode.
3 Press to turn the auto PI seek on.
A.PI
appears in the display.
ON
• Press again to turn the auto PI seek off.
A.PI
to select
A.PI