Understanding Built-In Cd Player Error Messages; About Traffic Information - Pioneer ANH-P9R-BK Operation Manual

Additional Information
Understanding built-in CD player
error messages
When problems occur during CD play an error
message may appear on the display. If an error
message appears on the display refer to the
table below to see what the problem is and the
suggested method of correcting the problem. If
the error cannot be corrected, contact your
dealer or your nearest Pioneer Service Center.
Message Cause
ERROR-11, 12, Dirty disc.
17, 30
ERROR-11, 12, Scratched disc.
17, 30
ERROR-14 Unrecorded
disc.
ERROR-22, 23 The CD format
cannot be
played back.
ERROR-10, 11, Electrical or
12, 14, 17, 30, mechanical
A0 problem.
ERROR-44 All tracks are
skip tracks.
HEAT CD player over-
heated.

About traffic information

• Because the information is updated only
periodically, it may take time to collect all the
information.
• Not all RDS stations provide traffic
information.
• Traffic information is not taken into account in
calculating estimated time of arrival time or
travel time for your destination.
• This product may not be able to receive traffic
information in some areas.
Action
• Pioneer does not bear responsibility for the
accuracy of the information transmitted.
Clean disc.
• Pioneer does not bear responsibility for
changes to information services provided by
Replace disc.
broadcasting stations or by related
companies, such as cancellation of the
services or changing to pay-services.
Check the disc.
Also, we do not accept return of the product
for this reason.
Replace disc.
Turn the ignition
ON and OFF, or
switch to a
different source,
then back to the
CD player.
Replace disc.
Turn off the CD
player and wait
until the CD
player cools
down.
Section
13
89
En