Charging The Battery - Motorola HDT 600 Owner's Manual

Charging the Battery

The LED indicator displays your charge status (See figure below).
Please note that the HDT 600 can be On, Off or in Suspend mode
while charging.
LED indicator
Red: charging
Green: battery full
Red blinks: charging problem
Press to unlock
HDT 600
Red LED indicating
HDT 600 locked
into Cradle
To avoid damage and provide optimal performance of
!
the HDT 600 and Cradle, use only a Motorola approved
power supply.
Caution
To charge the battery, perform the following steps:
1. Connect the power cable to the socket at the base of the Cradle.
2. Slide the HDT 600 into the Cradle and lock the HDT 600
inside by pushing it towards the back of the Cradle.
8
Push back to lock
HDT 600 into Cradle
Press to unlock
HDT 600