Table of Contents
Advertisement
Problem
HDT 600
stops respond-
ing
Incomplete or
no data trans-
mission
between HDT
600 and PC
Table 3: Troubleshooting
Cause
Problem in HDT
600 operating sys-
tem or communica-
tion network
HDT 600 is not
locked in Cradle
Cradle contacts are
not clean
Bad RS232 cable
Communication
software was incor-
rectly installed or
configured
Solution
Simultaneously press soft
keys 1, 2 and the Power but-
ton for at least 5 seconds; the
HDT 600 should function
again
If still does not respond,
simultaneously press soft
keys 2, 3 and 4 to restart your
HDT 600. The operation sys-
tem will reboot for about a
minute
Lock the HDT 600 properly
in Cradle (See that the red
LED is on)
Clean contacts and remove
dust and objects from within
the Cradle
Replace the RS232 cable
See your System Administra-
tor
19
Advertisement
Table of Contents
