Recording Video - LG LDV-S504 Owner's Manual

Recording
Settings concerning normal recording and event
recording.
Ch : Display the channel number.
Res. : Select the recording resolution.
Quality : Select the recording picture quality.
(LOWEST, LOW, NORMAL, HIGH or BEST)
Frame Rate : Select the frame rate. The frame rate
is the number of recorded frames in a second.
According to resolution, the frame rate is set to
automatically. If you set manually, refer to as below.
Resolution
352*240 1, 3, 5, 7.5, 15, 20, 30.
NTSC 704*240 1, 3, 5, 7.5, 15.
704*480 1, 3, 5, 7.5.
352*288 1, 3, 5, 6, 12.5, 20, 25
PAL 704*288 1, 3, 5, 6, 12.5
704*576 1, 3, 5, 6
Pre : Specify the pre-event recording time that
records the situation until the sensor alarm signal
has input or the motion has detected. (OFF, 5, 10,
20, 30, 40, 50 or 60 SEC)
Post : Specify the post-event recording time that
records the situation since the sensor alarm signal
has input or the motion has detected. (10 ,20, 30,
40, 50 SEC or 1, 2, 3, 5, 10 MINUTE)
Video
Select the video format between NTSC or PAL
according to your video system format.
1. Select the Video Format
2. Select [OK] and press ENTER.
Frame Rate
The confirmation message is displayed.
After the HDD have formatted, system will reboot.
27