Installation - Siemens SIMATRIX NEO V2 Configuration Manual

Installation

6 Installation
22
Siemens AB
Security Products
The SIMATRIX NEO V2 system is built in modular 19 inch format. The 19 inch
component trays have been designed to suit 19 inch frames and cabinets. The side
walls of the component trays are perforated to allow good ventilation in the housing
(via convection).
When installing component tray modules, make sure that:
the ventilation holes in the sides are not obstructed in any way
–
the maximum supply air temperature of 45°C is not exceeded in any of the
–
component tray modules
Fig. 5 Air flow through the SIMATRIX NEO V2
If the component trays in the SIMATRIX NEO V2 generate excessive heat, suitable
cooling must be provided (e.g. forced ventilation). The cooling air must be fed from
the right-hand side of the housing.