6.1
SIMATRIX NEO V2 connections
6.1.1
Interfaces and connections
Interface
Telemetry port 1
Telemetry port 2
Telemetry port 3
Telemetry port 4
Keyboard:
Expansion
COM2/3, COM4
ALARM 1-16 / TTY out
ALARM 17-32 / TTY out
LAN
SysLink
Alarm out
Electrical supply
Video inputs
Video outputs
Siemens AB
Security Products
Fig. 6
Rear view of the SIMATRIX NEO V2 (base module)
Connection
Connections for dome cameras, 4 x RJ9, RS422 / RS485,
Protocol: CDC (SCU) CCDA, CIVIS, Pelco-D, Molynx
Connections for dome cameras, 4 x RJ9, RS422 / RS485,
Protocol: CDC (SCU) CCDA, CIVIS, Pelco-D, Molynx
Connections for dome cameras, 4 x RJ9, RS422 / RS485,
Protocol: CDC (SCU) CCDA, CIVIS, Pelco-D, Molynx
Connections for dome cameras, 4 x RJ9, RS422 / RS485,
Protocol: CDC (SCU) CCDA, CIVIS, Pelco-D, Molynx
8 RJ12 sockets for connecting keyboards
for future extension options
9-pin Sub-D connectors, RS232 communication interfaces for connecting an external computer
37-pin Sub-D socket with 2 x 8 CL-20mA/TTY interfaces for connecting telemetry devices
Telemetriegeräten (CDC (SCU) protocol) and 2 x 16 alarm inputs for connecting detection groups
not supported, for future network connectability
RJ9 socket for connecting extension bay and the alarm box
25-pin Sub-D connector,8 universal open-collector outputs and relay with two change-over contacts
115 VAC to 230 VAC (+10% / -15%), 50 Hz to 60 Hz, max 250 mA (at 230 VAC) to 500 mA (at 115
VAC), power requirement 55 VA
BNC sockets for video inputs (75 connections, switchable using jumpers)
BNC sockets for video outputs
Installation
23