Connection To Sdi Equipment; Connection To Sdi Output Equipment - Fujitsu IP-HE950 Hardware User's Manual

IP-HE950 Hardware User's Guide
2.3
2.3
This section describes connection to SDI equipment.
2.3.1

Connection to SDI output equipment

Connect SDI output equipment to the SDI input of the IP-HE950E (encoder).
Connect a BNC cable to the SDI-IN connector of the IP-HE950E.
The following figure shows how to connect SDI output.
See

Connection to SDI Equipment

For details on connectors and cables, refer to "4.2 Cable and Connector
Details." For electrical specifications, refer to "A.2.3 Interface
specifications."
Figure 2-6 SDI output equipment connection
Chapter 2 Installation and Connection
Copyright 2017 FUJITSU LIMITED
26