Unit Settings And Operation (Vfd); Unit Settings And Operation (Front Panel) - Fujitsu IP-HE950 Hardware User's Manual

IP-HE950 Hardware User's Guide
3.3
3.3
This unit is equipped with six operation keys: [  ], [  ], [  ], [  ], [ENTER], and [CANCEL].
Use these keys to configure settings.
The front panel has a display of 22 characters x 4 lines.
For front panel operation and display instructions, refer to the IP-HE950 Software User's
Guide.
- Functional description of each key
[  ] and [  ] key functions
- Switches the menu items and setting items displayed on the front panel.
- Switches the displayed items with each press of a key. [  ] and [  ] switch the
displayed items in opposite directions.
[  ] and [  ] key functions
- Used to move the cursor displayed on the front panel to the right or left.
- Moves the cursor by one place with each press of a key.
[ENTER] key
- When the initial maintenance screen is displayed, pressing the [ENTER] key causes a
transition to the maintenance menu screen.
- Pressing the [ENTER] key from the maintenance menu screen allows you to display the
status and configure the shutdown settings.
[CANCEL] key
- When the maintenance menu screen is displayed, pressing the [CANCEL] key causes a
transition to the initial maintenance screen. Pressing the [CANCEL] key from the setting
item selection screen causes a transition to the screen immediately before the last
[ENTER] key operation.
Other
- In addition, on every screen, if 60 seconds elapse without input from any key, the
screen transitions to the initial screen.
Unit Settings and Operation
Figure 3-2 Front panel and operation keys
Chapter 3 Operation Instructions
Copyright 2017 FUJITSU LIMITED
38
(Front panel)