Removing The Secondary Transfer Outer Roller Unit - Canon imageRUNNER C1335 Series Service Manual

4
Disassembly/Assembly > Image Formation System > Removing the Secondary Transfer Outer Roller Unit > Procedure

Removing the Secondary Transfer Outer Roller Unit

■ Procedure
NOTE:
If the duration level of the ITB Unit and that of the Secondary Transfer Outer Roller Unit
are not equal, a color displacement may occur in the output image.
CAUTION:
Be sure not to touch the surface [A] of the roller when disassembling/assembling.
4 Disassembly/Assembly > Image Formation System > Removing the Secondary Transfer Outer Roller Unit > Procedure
F-4-296
[A]
F-4-297
1) Pull the Right Cover Open/Close Lever [1], and open the Right Cover Unit [2].
[1]
2) Hold the 2 edges [A], and remove the Secondary Transfer Outer Roller Unit [1].
• 2 Bosses [2]
[1]
[2]
[A]
NOTE: Actions after assembly
Execute Auto Adjust Gradation.
Settings/Registration > Adjustment/Maintenance > Adjust Image Quality > Auto Adjust
Gradation > Full Adjust
4-119
[2]
F-4-298
[A]
[2]
F-4-299
4-119