[1]
F-7-85
2) Lift the ITB unit [1] and remove it from the transfer cleaner unit [2].
- 2 bosses [3]
- 2 hooks [4]
[1]
[3]
F-7-86
Points to note when attaching
When attaching the transfer cleaner unit, hook the ITB edge [1] to the trans-
fer cleaner frame.
Also, make sure that the boss [2] on the ITB is fit into the hole on the transfer
cleaner frame securely before attaching the screw.
[1]
After attaching the transfer cleaner unit, make sure to check visually that the
scraper sheet is not folded at the both side of the transfer cleaner unit.
If the scraper sheet is folded, push the scraper sheet [2] with the paper folded
in three [1] etc.
[2]
[4]
7.9.7.3 Points to Note When Replacing the Transfer
Cleaner Unit
iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
When replacing the transfer cleaner unit, make sure to apply the lubricant
(cefbon) to the scraper sheet.
7.9.8 Secondary Transfer External Roller
7.9.8.1 Removing the Secondary Transfer Outer Roller
iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
1) Open the right cover.
2) Remove the transfer separation guide [1].
- 2 screws [2]
[1]
F-7-87
[1]
[3]
[2]
F-7-88
Chapter 7
[2]
0015-6942
0014-1321
7-49